政府計畫（GRB），建議「依年度遞減排序」，以查看最新的研究方向。
| 畢業學年度 | 論文標題 | 連結 | 學位 | 畢業時長(years) |
|---|---|---|---|---|
| 關鍵字 | ||||
| 112 | 運用六自由... 運用六自由度觸控筆與探針系統開發新式機器手臂遠端控制與編程方法 (Development of a Novel Robotic Arm Remote Control and Programming Method based on a System of Probe and 6-DOF Stylus) | NTHU NDLTD | 碩 | 2.68 |
機器手臂(Robot arm)、遠端控制(Remote control)、遠端編程(Remote program)、直觀操作(Intuitive control) 機器手臂(... | ||||
| 112 | 彈性3D成... 彈性3D成形技術： 失蠟鑄造蠟型之多樣幾何與成形條件實驗研究 (Freeform Additive Manufacturing: Study of Various Forming Geometries and Conditions for Making Lost-wax Casting Wax Patterns) | NTHU NDLTD | 碩 | 3.41 |
彈性 3D 成形技術(Freeform Additive Manufacturing)、失蠟鑄造(investment casting)、蠟型(wax pattern)、陶芯(ceramic core)、積層製造(additive manufacturing) 彈性 3D... | ||||
| 112 | 改進彈性 ... 改進彈性 3D 成型技術製作失蠟鑄造蠟型之佈料速率與表面精度 (Improving Wax Deposition Rate and Surface Finish in the Freeform Additive Manufacturing of Patterns for Lost-wax Casting) | NTHU NDLTD | 碩(提早入學) | 2.70 |
彈性 3D 成型技術(Freeform Additive Manufacturing)、熱刮製程(Hot scraping)、表面處理(Surface finishing)、提高積層製造進料與佈料速率(Raising deposition rate in additive manufacturing)、進料機構(Feeding mechanism) 彈性 3D... | ||||
| 112 | 紅外線測溫... 紅外線測溫儀之焦點針孔遮罩法設計開發 (Development of Focal Spot Pinhole Mask Method for IR Thermometer) | NTHU NDLTD | 碩 | 2.15 |
紅外光溫度量測(Infrared temperature measurement)、光學機構(optical mechanism)、精密微小點量測(precision micro-point measurement)、低成本測溫技術(low-cost measurement technology) 紅外光溫度... | ||||
| 111 | 以可遙控縮... 以可遙控縮尺模型實驗研究橫向主動繫泊技術之水翼操作 (Experimental Study of Hydro Sail Operations for the Cross-stream Active Mooring Technique using a Remote Controllable Scale Model) | NTHU NDLTD | 碩(外籍生) | 2.64 |
海洋潮流發電(Ocean Current Power)、蜿蜒流動(Meandering Flow)、可遙控式潛浮水翼(Controllable Submersible Hydro Sail) 海洋潮流發... | ||||
| 111 | 低成本精密... 低成本精密微位移計小量生產之產品設計與製程開發 (Product Design and Manufacturing Process Development for Small Lot Production of the Low-cost Micro-displacement Sensors) | NTHU NDLTD | 碩 | 2.57 |
精密微位移計(precision displacement sensor)、槓桿放大機構(multi-layer lever type magnification mechanism)、霍爾元件(hall sensor) 精密微位移... | ||||
| 111 | 適用於台灣... 適用於台灣海峽的浮式風機平台之設計與研究 (Design and Study of a Floating Wind Turbine Platform Suitable for Operation in the Taiwan Strait) | NTHU NDLTD | 碩 | 2.56 |
風浪負載(Wind and wave loads)、縮尺模型實驗(scale-model testing)、最佳化(optimization)、動態分析(dynamic analysis)、成本分析(cost analysis) 風浪負載(... | ||||
| 111 | 低成本機械... 低成本機械量尺之機構設計與開發 (Design and Development of the Mechanism of the Low-cost Mechanical Scale) | NTHU NDLTD | 碩 | 2.51 |
低成本位移計(Low-cost Compact Micro-Displacement Sensor(LCMDS))、機械量尺(Low-cost Mechanical Scale(LMS))、接觸式量測(Contact Measurement) 低成本位移... | ||||
| 110 | PCB微鑽... PCB微鑽孔孔位線上即時檢測系統之機台設計製作與初步測試 (Design, Building and Preliminary Tests of Motion Stages for a Real-Time Hole Positions Inspection System for PCB Micro Drilling) | NTHU NDLTD | 碩 | 4.00 |
孔位檢測(Hole position inspection)、低厚度(low-profile)、xy移動平台(xy motion stages) 孔位檢測(... | ||||
| 110 | 彈性3D成... 彈性3D成形技術：蠟件之表面熱刮製程實驗研究 (Freeform Additive Manufacturing: Experiments and Study of Surface Hot Scraping Process for Wax Parts) | NTHU NDLTD | 碩 | 2.49 |
彈性3D成形技術(Freeform Additive Manufacturing)、表面處理(surface finishing)、熱刮製程(hot scraping) 彈性3D成... | ||||
| 110 | 彈性3D成... 彈性3D成形技術：曲面熱刮製程及佈料頭座向控制之軟體程序開發 (Freeform Additive Manufacturing: Software Algorithm Development for Hot Scrapping of Curved Surfaces and Orientation Control of the Dispensing Head) | NTHU NDLTD | 碩(外籍生) | 2.36 |
刀具路徑規劃(Tool path planning)、熱刮品質改善(Quality improvement of hot scrapping)、佈料頭座向控制(The orientation control of the dispensing head)、軟體開發(Software development) 刀具路徑規... | ||||
| 109 | 低成本精密... 低成本精密微位移計樣品機開發與新式機械量尺初步研究 (Development of alpha model of the Low-cost Compact Micro-displacement Sensor and Preliminary Study of a Novel Mechanical Scale) | NTHU NDLTD | 碩 | 2.21 |
放大機構(Amplification mechanism)、精密微位移計(Precision displacement sensor)、精密位移量測(Precision displacement measurement) 放大機構(... | ||||
| 109 | 橫向主動繫... 橫向主動繫泊海流發電系統基本功能縮尺模型實驗 (Scale Model Study of Basic Functions of the Cross-stream Active Mooring Marine Current Power System) | NTHU NDLTD | 碩 | 3.05 |
黑潮發電(Kuroshio power generation)、縮尺模型(scale model)、橫向系泊(Cross-stream Active Mooring)、水翼(storm avoidance)、躲避風浪(undefined) 黑潮發電(... | ||||
| 109 | 橫向主動繫... 橫向主動繫泊海流發電系統水翼機動模型與斜坡重力錨之設計與縮尺實驗 (Development and Experiments of Mobile Hydro Sail and Deadweight-on-slope Anchor Scale Models for the Cross-stream Active Mooring Marine Current Power System) | NTHU NDLTD | 碩 | 2.05 |
黑潮發電(Kuroshio power generation)、海流發電系統(ocean current power generation system)、水翼(hydro sail)、錨碇(anchorage)、水工實驗(hydraulic experiment)、縮尺模型(scale model) 黑潮發電(... | ||||
| 109 | PCB微鑽... PCB微鑽孔孔位線上即時檢測系統設計開發 (Design and Development of a Real-Time Hole Positions Inspection System for PCB Micro Drilling) | NTHU NDLTD | 碩 | 2.42 |
PCB(PCB)、光學檢測(AOI)、位置檢測(hole positions)、影像辨識(image processing) PCB(P... | ||||
| 108 | 低成本機械... 低成本機械放大機構精密微位移量測與致動系統設計與開發 (Design and Development of Low-Cost Precision Micro-displacement Sensing and Actuation Systems based on Mechanical Amplification Mechanisms) | NTHU NDLTD | 碩(提早入學) | 2.35 |
精密位移感測器(precision displacement sensor)、撓性放大機構(flexible magnification mechanism)、不等傾角機構(uneven-legs tilting mechanism) 精密位移感... | ||||
| 108 | Z探棒2.... Z探棒2.0：五自由度人機互動筆角度機制與Unity介面開發 (Z-Pen 2.0: Development of Angular Mecha-nism of a 5-DOF Stylus and an Interface with Unity®) | NTHU NDLTD | 碩 | 2.08 |
3D電腦繪圖(3D drawing)、觸控筆(Touch stylus)、角度偵測(Angle detection)、人機互動裝置(Human-computer interaction device) 3D電腦繪... | ||||
| 108 | 彈性 3D... 彈性 3D成形技術：工業用蠟之佈料系統與製程開發 (Freeform Additive Manufacturing: Material Dispensing System and Process Development for Investment Casting Wax) | NTHU NDLTD | 碩 | 2.08 |
彈性3D成型技術(Freeform Additive Manufacturing)、表面處理(Hot scraping)、熱刮成型(Investment Casting Wax)、工業用蠟(undefined) 彈性3D成... | ||||
| 108 | 彈性3D成... 彈性3D成形技術：鋅鋁合金與不鏽鋼佈料塑形機構與製程開發 (Freeform Additive Manufacturing：Development of Dispensing and Shaping Mechanisms and Processes for Zn-Al Alloys and Stainless Steel) | NTHU NDLTD | 碩 | 2.08 |
快速原型(Rapid prototype)、積層製造(Additive manufacturing)、金屬模具(Metal molding) 快速原型(... | ||||
| 108 | 浮式風機浮... 浮式風機浮台及繫泊系統基本設計模型開發與各式設計評估 (Development of Basic Design Model of Platform and Mooring for Floating Wind Power Systems and Evaluation of Various Designs) | NTHU NDLTD | 碩 | 2.04 |
浮式離岸風機(offshore floating wind turbine)、繫泊系統(mooring system)、有限元素法(finite element method)、有限差分法(finite difference method)、動態分析(dynamic analysis) 浮式離岸風... | ||||
| 106 | 低成本精密... 低成本精密位移計設計與開發 (Design and Development of a Low-Cost Precision Displacement Sensor) | NTHU NDLTD | 碩 | 1.99 |
精密位移計(Precision displacement sensor)、撓性機構(Flexure hinge)、放大機構(Amplification mechanism)、霍爾元件(Compliant mechanism) 精密位移計... | ||||
| 106 | 彈性3D成... 彈性3D成形技術：表面製程 (Surface Processing for Freeform Additive Manufacturing) | NTHU NDLTD | 碩 | 1.98 |
彈性3D成形技術(Freeform Additive Manufacturing)、表面處理(surface finishing)、熱刮成形(hot scraping) 彈性3D成... | ||||
| 106 | 可轉換全向... 可轉換全向3D顯示與2D投影系統光學與光機設計 (Opto-mechanical Design of Convertible Volumetric 3D Display and 2D Projection System) | NTHU NDLTD | 碩 | 3.98 |
全向3D(omnidirectional 3D image)、體積顯示(Volumetric display)、多影像模式(multi-image mode projection device)、光學與光機設計(Opto-mechanical design)、2D投影系統(2D projector)、全方位環繞視角(unlimited surrounding view range) 全向3D(... | ||||
| 106 | 彈性3D成... 彈性3D成形技術幾何資料處理軟體開發 (Geometric Data Processing Software Development for the Freeform Additive Manufacturing) | NTHU NDLTD | 碩 | 1.96 |
快速原型(rapid prototype)、積層製造(additive manufacturing)、五軸路徑規劃(five-axis path planning)、適形列印(conformal printing) 快速原型(... | ||||
| 106 | 新型數位鏡... 新型數位鏡列掃描技術 (Innovative Digital Beam Scanning Technique) | NTHU NDLTD | 碩 | 2.70 |
雷射掃描(Laser scanning)、撓性機構(Flexure mechanism)、無人機通訊(Drone communication) 雷射掃描(... | ||||
| 106 | 數位微鏡元... 數位微鏡元件之電子介面與控制系統的設計開發 (Design and Development of Electronic Interface and Control System to the Digital Micromirror Device) | NTHU NDLTD | 碩 | 2.03 |
3D顯示(3D Display)、數位微鏡元件(DMD)(Digital Micromirror Device (DMD))、高畫面率資料更新(high frame rate data update) 3D顯示(... | ||||
| 105 | 外纜承風式... 外纜承風式模組化輕量風機葉片設計開發 (Design and Development of Lightweight Wind Turbine Blades based on External Force-bearing Cables and Modular Structure) | NTHU NDLTD | 碩 | 1.99 |
風力發電機葉片(wind turbine blade)、葉片輕量化結構(lightweight blade structure)、模組化組合式葉片(blade assembly modularization) 風力發電機... | ||||
| 104 | 橫向主動系... 橫向主動系泊式海流發電系統 (Ocean Current Power System featuring an Active Mooring Concept) | NTHU NDLTD | 碩 | 無口試日期 |
洋流發電(Ocean current power system)、水翼(Hydro Sail)、黑潮(Kuroshio)、洋流流軸追蹤(fast flow tracking)、橫向主動系泊式系統(Active mooring system) 洋流發電(... | ||||
| 104 | Z探棒:創... Z探棒:創新3D人機互動裝置 (Z-Stylus: a Novel Device for 3D Human-Computer Interface) | NTHU NDLTD | 碩 | 無口試日期 |
電腦輸入裝置(human-computer interaction)、3D電腦繪圖(3D computer graphics)、觸控板(touchpad) 電腦輸入裝... | ||||
| 104 | 數位微鏡元... 數位微鏡元件之電子介面與控制系統 的初步設計開發 (Preliminary Design and Development of Electronic Interface and Control System to the Digital Micromirror Device) | NTHU NDLTD | 碩 | 無口試日期 |
3D顯示(3D Display)、DMD晶片(Digital Micromirror Device(DMD))、USB 3.0(USB3.0)、高速電子中介板(high speed printed circuit board(PCB)) 3D顯示(... | ||||
| 104 | 封閉式油腔... 封閉式油腔液靜壓軸承：單油腔裝置開發 (Sealed Pad Hydrostatic Bearing： Single Pad Unit Basic Development) | NTHU NDLTD | 碩 | 無口試日期 |
液靜壓軸承(hydrostatic bearing)、封閉式油腔(sealed pad)、密封(seal) 液靜壓軸承... | ||||
| 104 | 彈性變向佈... 彈性變向佈料高速3D成形技術：金屬材料之佈料系統與製程開發 (High Speed Flexible 3D Freeform Techniques: Material Dispensing System and Process Development for Metals) | NTHU NDLTD | 碩逕博 | 無口試日期 |
快速原型(Rapid Prototyping)、積層製造(Additive Manufacturing)、金屬模具(injection molding)、異型水路模具(conformal cooling) 快速原型(... | ||||
| 104 | 低畸變超短... 低畸變超短焦鏡頭應用於透視投影系統之研究 (Research of Low-distortion Ultra-short Optics for See-through Projection Systems) | NTHU NDLTD | 碩 | 無口試日期 |
低畸變、超短焦鏡頭、透視投影、投射比 低畸變、超... | ||||
| 104 | 相位矽基液... 相位矽基液晶全像漂浮影像疊合之研究 (Fusion of holographic floating Images generated with phase type liquid crystal on silicon) | NTHU NDLTD | 碩 | 無口試日期 |
漂浮影像(Floating image)、矽基液晶(LCoS)、電腦全像(CGH)、發光二極體(LED)、擴增視角(extend viewing angle) 漂浮影像(... | ||||
| 104 | 彈性變向佈... 彈性變向佈料高速3D成形技術：熱塑型塑膠佈料系統與製程開發 (High Speed Flexible 3D Freeform Technique: Material Dispensing System and Process Development for Thermoplastics) | NTHU NDLTD | 碩 | 無口試日期 |
快速成形技術(rapid prototype)、積層製造(Additive Manufacturing)、製程開發(process development) 快速成形技... | ||||
| 103 | 線型雷射光... 線型雷射光束成型模組於口內齒模掃描裝置之設計與應用研究 (The Application and Design of Line Laser Beam Shaping Module for Intra-Oral Scanner) | NTHU NDLTD | 碩 | 無口試日期 |
口內掃描(intra-oral)、光束整型(beam shaping)、線型雷射光束(line laser beam) 口內掃描(... | ||||
| 103 | 相位矽基液... 相位矽基液晶全像漂浮影像系統之分析研究 (Analytical Research on Phase Type LCoS Holographic Floating Imaging System) | NTHU NDLTD | 碩 | 無口試日期 |
漂浮影像(Floating image)、立體顯示(3D display)、矽基液晶(LCoS)、電腦全像(CGH)、發光二極體(LED)、近眼顯示(near eye display) 漂浮影像(... |