政府計畫（GRB），建議「依年度遞減排序」，以查看最新的研究方向。
| 畢業學年度 | 論文標題 | 連結 | 學位 | 畢業時長(years) |
|---|---|---|---|---|
| 關鍵字 | ||||
| 112 | 應用呼吸生... 應用呼吸生物標記以及機器學習於肝功能的預測 (Prediction Related to Liver Functions Using Breath Biomarkers and Machine Learning) | NTHU NDLTD | 博 | 6.60 |
肝(Liver)、呼吸生物标志物(Breath biomarkers)、挥发性有机化合物(Volatile organic compounds)、机器学习(Machine-learning)、数据增强(Data-augmentation) 肝(Liv... | ||||
| 112 | 異常偵測模... 異常偵測模型應用於碳化矽晶圓拋光之破片檢測系統 (Application Anomaly Detection Model in Monitoring System for Polishing Station of Silicon Carbide Wafers) | NTHU NDLTD | 碩 | 2.58 |
雙面拋光(Double-sided Polishing)、訊號擷取(Signal acquisition)、特徵分析(Feature Analysis)、異常偵測模型(Local Outlier Factor Model) 雙面拋光(... | ||||
| 112 | 階次分析與... 階次分析與機器學習應用於矽晶圓磨平加工暫態階段的破片偵測 (Application of Order Analysis and Machine Learning to Silicon Wafer Fragments During Transient Processing Steps of Lapping Process) | NTHU NDLTD | 碩 | 2.58 |
磨平加工(Lapping)、暫態加工階段(Transient State Processing)、矽晶圓破片(Silicon Wafer Fragments)、階次分析(Order Analysis)、異常偵測(Anomaly Detection) 磨平加工(... | ||||
| 112 | 基於加工訊... 基於加工訊號分析建立矽晶圓圓邊站亮點監測系統 (Development of Silicon Wafer Edge Station Chipping Monitoring System Based on Process Signal Analysis) | NTHU NDLTD | 碩 | 2.02 |
矽晶圓(silicon wafer)、圓邊研磨(edge grinding)、砂輪(grinding wheel)、瑕疵檢測(defect detection)、振動訊號(vibration)、異常監測(anomaly detection) 矽晶圓(s... | ||||
| 111 | 異常偵測模... 異常偵測模型應用於矽晶圓磨平之加工監測系統 (Application of Anomaly Detection Model to Process Monitoring in Lapping of Silicon Wafer) | NTHU NDLTD | 碩 | 2.04 |
雙面磨平(Double-side lapping)、訊號分段(Signal segmentation)、主成分分析(Principal component analysis)、異常偵測模型(Anomaly detection model) 雙面磨平(... | ||||
| 110 | 基於FPG... 基於FPGA定量微分相位差顯微鏡模組實現以深度學習優化之活細胞成像 (FPGA-based Quantitative Differential Phase Contrast Microscopy for Live Cell-imaging optimized by Deep Learning) | NTHU NDLTD | 碩(提早入學) | 2.40 |
各向同性定量微分相位差顯微術(Isotropic Quantitative Differential Phase Contrast Microscopy)、現場可程式化邏輯閘陣列(Field Programmable Gate Array)、深度學習(Deep Learning)、活細胞成像(Live Cell Imaging) 各向同性定... | ||||
| 109 | 機器學習應... 機器學習應用於矽晶圓圓邊研磨品質預測 (Application of machine learning to the quality prediction of silicon wafer edge-grinding process) | NTHU NDLTD | 碩 | 2.15 |
矽晶圓圆邊(Silicon wafer grinding)、振動訊號(vibration signal)、聲音訊號(sound signal)、機器學習(machine learning)、加工過程監控(process monitoring) 矽晶圓圆邊... | ||||
| 109 | 磨削振動與... 磨削振動與聲音訊號於晶圓表面研磨之應用研究 (A Study of Wafer Surface Lapping Using Grinding Vibration and Sound Signal) | NTHU NDLTD | 碩 | 2.15 |
矽晶圓表面研磨(Silicon Wafer Surface Lapping)、雙面研磨(Double-sided Lapping)、磨削監測(Grinding Monitoring)、振動訊號(Vibration Signal)、主成分分析(Principal Component Analysis) 矽晶圓表面... | ||||
| 109 | 應用機器學... 應用機器學習於端銑刀壽命分級系統 (Application of Machine Learning in End Mill Lifetime Classification System) | NTHU NDLTD | 碩 | 2.13 |
端銑刀(End mill)、刀具磨耗(Cutter wear)、機械視覺(Machine vision)、三維重建(3D reconstruction)、機器學習(Machine learning) 端銑刀(E... | ||||
| 108 | 端銑刀磨耗... 端銑刀磨耗樣態分類系統 (End Mill Wear Type Classification System) | NTHU NDLTD | 碩 | 2.00 |
機械視覺(Machine vision)、三維重建(3D reconstruction)、刀具磨耗(Cutter wear)、分類系統(Classification System) 機械視覺(... | ||||
| 107 | 端銑刀磨耗... 端銑刀磨耗定量檢測系統 (End-milling Cutter Wear Quantitative Inspection System) | NTHU NDLTD | 碩 | 1.96 |
刀具磨耗(Cutter wear)、機械視覺(Machine vision)、三維重建(3D reconstruction)、量化(quantify)、QR碼(QRcode)、智慧化(smart machine) 刀具磨耗(... | ||||
| 107 | 應用結構光... 應用結構光於銑刀端面磨耗檢測系統 (Milling End Wear Monitoring System using Structured Light) | NTHU NDLTD | 碩 | 1.96 |
銑刀端面(End face of milling tool)、刀具磨耗(Tool wear)、結構光(Structured light)、四步相移(Four-step phase shifting) 銑刀端面(... | ||||
| 107 | 主軸振動與... 主軸振動與聲音訊號於晶圓磨削之應用研究 (A Study of Wafer Grinding Using Spindle Vibration and Sound Signal) | NTHU NDLTD | 碩 | 1.96 |
晶圓研磨(silicon wafer grinding)、磨削監測(grinding process monitoring)、振動信號(Vibration Signal)、聲音訊號(Audible Sound Signal) 晶圓研磨(... | ||||
| 106 | 矽油應用於... 矽油應用於次ppm級氨氣檢測肝功能不良之可攜式超薄氮化銦感測器 (Portable Ultrathin InN Gas Sensor for Selective Sensing of sub-ppm Ammonia Gas by using External Filter of Silicone oil for the Liver Malfunction Application) | NTHU NDLTD | 博 | 6.00 |
气体传感器(Gas sensor)、InN(InN)、硅油(Silicone oil)、撞击管(Impinger tube)、呼出的呼吸VOCs(Exhaled Breath VOCs)、肝功能不全(Gas sensor) 气体传感器... | ||||
| 106 | 氮化矽屏蔽... 氮化矽屏蔽奈米化矽基氮化鎵之回融蝕刻現象研究 (The study of the meltback etching phenomenon for silicon nitride sealed nanotextured GaN-on-Si) | NTHU NDLTD | 碩 | 2.00 |
奈米結構(nanotexture)、強度提升(stress strengthening)、氮化鎵(GaN)、磊晶(epitaxy)、回融蝕刻(Melt-back etching) 奈米結構(... | ||||
| 106 | 應用三維機... 應用三維機械視覺於端銑刀磨耗檢測系統 (End-milling cutter wear monitoring system using three-dimensions machine vision) | NTHU NDLTD | 碩 | 1.96 |
自動光學檢測(automatic optical inspection)、機械視覺(machine vision)、三維重建(3D reconstruction)、刀具磨耗(cutter wear) 自動光學檢... | ||||
| 106 | 應用條紋投... 應用條紋投影法與四步相移法於刀具檢測 (Application of fringe projection method and four-step phase shifting method for tool inspection) | NTHU NDLTD | 碩 | 1.96 |
數位條紋投影(digital fringe projection)、四步相移法(four-step phase shifting method)、刀具檢測(tool inspection) 數位條紋投... | ||||
| 106 | 外接式過濾... 外接式過濾裝置設計應用於肝功能異常呼氣檢測 (An External Filter Design for Selectivity in Liver Malfunction Breath Detection) | NTHU NDLTD | 碩 | 2.50 |
過濾裝置(filter)、吸收劑(absorbent)、雜訊(noise) 過濾裝置(... | ||||
| 106 | 硫酸鈣人工... 硫酸鈣人工骨水泥應用於3D列印成型參數之抗壓強度分析 (Compressive Strength Analysis of Calcium Sulfate Synthetic Bone Fabricated by 3D Printing Technology with Different Modeling Parameters) | NTHU NDLTD | 碩 | 2.39 |
硫酸鈣人工骨(Calcium Sulfate Synthetic Bone)、3D列印(3D printing)、抗壓強度分析(Compressive strength test)、積層製造(undefined) 硫酸鈣人工... | ||||
| 105 | 結合手機與... 結合手機與雷射掃描以三維影像重建10mm對稱性物體之輪廓 (Smartphone based laser scanner with 3D reconstruction applied for 10mm symmetrical structure contour) | NTHU NDLTD | 碩 | 1.99 |
三維掃描(3D scanning)、手機(Smartphone)、雷射掃描輔助(Laser assisted scanning)、輪廓掃描重建(Structured contour reconstruction)、三維影像重建(3D reconstruction)、點雲圖(Point of cloud) 三維掃描(... | ||||
| 105 | 高強度屏蔽... 高強度屏蔽奈米化矽基板之應力控制以抑制氮化鎵磊晶後基板翹曲 (Stress control of high strength sealed nanotextured silicon wafer to resist warpage after GaN epitaxy) | NTHU NDLTD | 碩 | 1.98 |
矽基氮化鎵(GaN-on-Si)、奈米化(nanotexturing)、強度提升(strength enhancement)、應力控制(stress control)、磊晶(epitaxy) 矽基氮化鎵... | ||||
| 105 | 多晶/非晶... 多晶/非晶矽屏蔽奈米結構應用於氮化鎵磊晶驗證之強化矽基板 (High Strength Si(111) Substrate with Poly-Si/α-Si Sealing Nanotexture for GaN) | NTHU NDLTD | 碩 | 1.98 |
應力強化(stress strengthening)、奈米結構(nanotexture)、磊晶(epitaxy)、電子槍蒸鍍系統(e-gun) 應力強化(... | ||||
| 104 | 射頻有機金... 射頻有機金屬分子數磊晶之響應優化於氮化銦氣體感測器 (Optimizing the Response of Thin Film InN Based Gas Sensor Grown by RF-MOMBE for Ammonia Sensing) | NTHU NDLTD | 碩(外籍生) | 無口試日期 |
半導體氣體感測器(Semiconductor Gas Sensor)、超薄氮化銦薄膜(Ultra-Thin InN film)、電阻式氣體感測器(RF-MOMBE)、溫度調變(Resistive type Gas Sensor) 半導體氣體... | ||||
| 104 | 介電式液態... 介電式液態透鏡用於3D金屬雷射列印 之表面缺陷檢測 (Using Dielectric Liquid Lens to Detect Surface Defects of 3D Metal Laser Printing) | NTHU NDLTD | 碩 | 無口試日期 |
介電式液態透鏡(Dielectric liquid lens)、金屬3D列印(3D metal printing)、孔洞(holes)、即時檢測(real-time detection) 介電式液態... | ||||
| 104 | 矽油應用於... 矽油應用於丙酮與氨氣之選擇性前處理 (Selective Pretreatment by Silicone Oil to Distinguish Ammonia from Acetone) | NTHU NDLTD | 碩 | 無口試日期 |
氣體感測器(gas sensor)、氨氣(ammonia)、丙酮(acetone)、矽油(silicone oil)、前處理(pretreatment) 氣體感測器... | ||||
| 104 | 六吋高強度... 六吋高強度屏蔽奈米化矽基板之GaN磊晶可行性驗證 (6-inch GaN Growth on Silicon Substrates Strengthened by Sealed Nanotextures) | NTHU NDLTD | 碩 | 無口試日期 |
矽基氮化鎵(GaN on Silicon)、奈米化(nanotexturing)、強度提升(strength enhancement)、磊晶(epitaxy)、電性(electrical property) 矽基氮化鎵... | ||||
| 103 | 應用於翡翠... 應用於翡翠分析之多光譜變焦觀察鏡設計 (Multispectra Tunable Forensice Lens Design for Jadeite Analysis) | NTHU NDLTD | 碩 | 無口試日期 |
翡翠分析(Jadeite analysis)、多光譜影像(Multispectra imaging)、寶石觀察鏡(Gemstone forensic lens)、液態透鏡(Liquid lens) 翡翠分析(... | ||||
| 103 | 屏蔽式奈米... 屏蔽式奈米化技術應用於半導體產業之高強度矽基板 (Covered Nanotexturing for High Strength Silicon Substrate Applied in IC Industry) | NTHU NDLTD | 碩 | 無口試日期 |
應力強化(stress enhancement)、金屬催化濕式蝕刻法(Metal-Catalyzed Wet-Etching)、微粒(particle)、空隙(void) 應力強化(... | ||||
| 103 | 運用應力補... 運用應力補償層及奈米結構技術於新型GaN磊晶矽基板之研究 (Silicon Substrate for GaN Epi-Growth by Stress Compensation Layer and Nanostructure Technique) | NTHU NDLTD | 碩 | 無口試日期 |
氮化鎵磊晶(GaN epitaxy)、應力補償層(Stress compensation layer)、熱不匹配(Thermal mismatch) 氮化鎵磊晶... | ||||
| 102 | 介電式液態... 介電式液態透鏡之非線性LEM模型 (Nonlinear Lumped Element Model of Dielectric Liquid Lens) | NTHU NDLTD | 碩 | 無口試日期 |
介電力(Dielectric force)、液態透鏡(Liquid lens)、液體參數(Liquid parameters)、接觸角(Contact angle) 介電力(D... | ||||
| 102 | Analy... Analysis of Non-Nucleoside Reverse Transcriptase Inhibitors for Human Immunodeficiency Virus Type 1 by AlGaN/GaN High Electron Mobility Transistors and Binding-site Model (not found) | NTHU NDLTD | 碩 | 無口試日期 |
AlGaN/GaN高電子遷移率電晶體、人類免疫缺陷病毒、非核苷類反轉錄酶抑制劑 AlGaN... | ||||
| 102 | 晶背奈米結... 晶背奈米結構強化可撓曲P-MOSFET薄型晶片 之機械與電性研究 (Mechanical & Transistor Properties of Flexible P-MOSFET Wafers Strengthened by Nanostructure on Backside) | NTHU NDLTD | 碩 | 無口試日期 |
矽晶圓薄化、旋轉式濕式蝕刻、無電極金屬蝕刻、單軸壓縮應變、金氧半場效電晶體 矽晶圓薄化... | ||||
| 102 | 應用於老花... 應用於老花眼鏡之橢圓形介電式液態透鏡 (Elliptical Dielectric Liquid Lens for Presbyopia Glasses) | NTHU NDLTD | 碩 | 無口試日期 |
介電式液態透鏡(dielectric liquid lens)、變焦眼鏡(adjustable glasses)、老花眼鏡(presbyopia glasses) 介電式液態... | ||||
| 102 | 氮化銦感測... 氮化銦感測器對肝病氣體及干擾氣體影響之研究 (Breath Gas Response to Liver Malfunction with Consideration of Non-correlated Gases on InN Sensor) | NTHU NDLTD | 碩(提早入學) | 無口試日期 |
氮化銦、氣體感測器、氨氣、二甲基硫 氮化銦、氣... | ||||
| 101 | 以菲左干涉... 以菲左干涉儀探討液態透鏡介面行為 (Liquid-Liquid Interface Behavior of Liquid Lenses Measurement Using Fizeau Interferometer) | NTHU NDLTD | 碩 | 無口試日期 |
介電力(dielectric force)、液態透鏡(liquid lens)、液-液介面(liquid-liquid interface)、液滴振動(droplet oscillation)、干涉條紋(interferograms) 介電力(d... | ||||
| 101 | 微圖型化甲... 微圖型化甲殼素基材用於神經元導引之發展 (Development of Micropatterned Chitosan Substrates for Neuronal Guidance) | NTHU NDLTD | 碩 | 無口試日期 |
甲殼素基材(Chitosan substrates)、黃光微影(Neuro-2a cells)、感應耦合式電漿反應離子蝕刻(ICP-RIE)、濕式化學蝕刻(wet chemical etching)、溶劑鑄造技術(solvent casting) 甲殼素基材... | ||||
| 101 | 以五環素與... 以五環素與白金提升氮化銦對氨氣選擇性 (Enhanced Ammonia Selectivity of InN Gas Sensor with Pentacene and Platinum) | NTHU NDLTD | 碩 | 無口試日期 |
氮化銦(InN)、氨氣(Ammonia)、氣體感測器(Gas Sensor) 氮化銦(I... | ||||
| 101 | 以微拉曼探... 以微拉曼探討表面奈米結構熱應力下降現象 (Micro-Raman Investigation of Thermal-Stress Reduction by Surface Nanostructures) | NTHU NDLTD | 碩 | 無口試日期 |
金屬催化濕式蝕刻法(Metal-Catalyzed Wet-Etching)、拉曼光譜儀(Raman Spectroscopy)、熱應力下降(Thermal Stress Reduction) 金屬催化濕... | ||||
| 101 | 直徑2.5... 直徑2.5公分變焦2 D介電式液態透鏡 (Dielectric Liquid Lens of 2.5 cm in Diameter with 2 Diopter Focal Changing) | NTHU NDLTD | 碩 | 無口試日期 |
介電式、液態透鏡、大尺寸、可變焦 介電式、液... |