Labook

清大研究所畢業論文與畢業時長統計

蔡哲瑋(博: 3.96 years、碩: 1.96 years)

政府計畫(GRB),建議「依年度遞減排序」,以查看最新的研究方向。

畢業學年度論文標題連結學位畢業時長(years)
關鍵字
112
探討混合熵...
探討混合熵對非等莫耳CoCrFeNiV合金之析出成長活化能與機械性質影響 (Effect of Mixing Entropy on Growth Activation Energy of Precipitation and Mechanical Properties in CoCrFeNiV Alloys)
NTHU
NDLTD
2.00
高熵合金(High-entropy alloys)、微結構(microstructure)、活化能(activation energy)、高溫磨耗性質(high-temperature wear properties)
高熵合金(...
112
非等莫耳C...
非等莫耳CoCrFeMoNi耐蝕高熵合金之銲接性質探討 (Study on the Welding Properties of Corrosion-resistant Non-Equiatomic CoCrFeMoNi High-Entropy Alloy)
NTHU
NDLTD
2.00
高熵合金(High-entropy alloy)、銲接微結構(Welding microstructure)、臨場機械性質分析(In-situ mechanical property analysis)、腐蝕(Corrosion)
高熵合金(...
112
耐火高熵合...
耐火高熵合金雙層抗氧化塗層開發 (Development of Refractory High-Entropy Alloy with Dual-layer Anti-oxidation Coating)
NTHU
NDLTD
2.00
耐火高熵合金(refractory high entropy alloy)、溶膠凝膠(sol-gel method)、電弧噴塗鋁(arc-sprayed aluminum)、氧化測試(oxidation test)、高溫拉伸(high temperature tensile test)
耐火高熵合...
112
非等莫耳C...
非等莫耳CoCrCuNi合金添加Si分析疊差能對變形機制之影響 (The effect of stacking fault energy on the deformation behaviors in non-equal molar CoCrCuNi alloys with Si addition)
NTHU
NDLTD
1.99
疊差能測量(measurement of stacking fault energy)、微量元素添加(addition of minor elements)、變形機制(deformation mechanism)
疊差能測量...
112
反應性燒結...
反應性燒結對耐火高熵複合材料之性質探討 (Investigation of Refractory High Entropy Alloys by Reaction Sintering Process and Properties of Synthesized Composites)
NTHU
NDLTD
1.99
耐火高熵合金(Refractory high-entropy alloys)、複合材料(Metal matrix composites)、反應性燒結(Reaction sintering)、熱分析(Thermal analysis)、高溫硬度(High-temperature hardness)
耐火高熵合...
112
梯度中間層...
梯度中間層對(AlCrNbSiTi)N高熵氮化膜之結構與性質探討 (Study on the Structure and Properties of (AlCrNbSiTi)N Films with Gradient Interlayer)
NTHU
NDLTD
1.91
高熵氮化膜(high-entropy nitride film)、附著性(adhesion)、中間層(interlayer)
高熵氮化膜...
111
粉末擴散法...
粉末擴散法對高熵合金之高溫氧化與機械性質影響 (Effect of pack cementation on high temperature oxidation resistance and mechanical properties of high entropy alloy)
NTHU
NDLTD
1.99
高熵超合金(High entropy superalloys)、粉末擴散法(pack cementation)、滲鋁鍍層(aluminide coating)、抗氧化性(oxidation resistance)
高熵超合金...
111
探討熱機處...
探討熱機處理對非等莫耳CoCrFeMoNi之腐蝕及磨耗阻抗影響 (Study on the corrosion and wear resistances of non-equiatomic CoCrFeMoNi alloy by thermomechanical processing)
NTHU
NDLTD
1.99
高熵合金(High-entropy alloys)、微結構(Microstructure)、機械性質(Mechanical property)、腐蝕性質(Corrosion property)
高熵合金(...
111
週期與成分...
週期與成分比例對 TiN/AlSiN 多層膜之附著性及抗氧化性探討 (Study on the adhesion and oxidation resistance of TiN/AlSiN multilayer thin film)
NTHU
NDLTD
1.99
多層膜(multilayers)、抗氧化性(oxidation resistance)、機械性質(mechanical properties)
多層膜(m...
111
微量鎢對C...
微量鎢對CoCrFeNi高熵合金高溫壓縮和腐蝕性質研究 (Effect of Minor Tungsten on Compressive and Corrossive Properties of CoCrFeNi High-Entropy Alloy at Elevated Temperature)
NTHU
NDLTD
1.94
高熵合金(High-entropy alloy)、高溫壓縮(Hot compression)、微結構(microstructure)、升溫腐蝕(increasing-temperature corrosion)
高熵合金(...
111
探討循環熱...
探討循環熱機處理於高熵形狀記憶合金之超彈性影響 (Exploration of superelasticity properties of high entropy shape memory alloy through cyclic thermomechanical process)
NTHU
NDLTD
1.94
高熵合金(High-entropy alloy)、形狀記憶合金(Shape memory alloy)、超彈性(Superelasticity)
高熵合金(...
110
耐火高熵合...
耐火高熵合金粉末製程對複合材料之熱性質探討 (Development and Exploration of Refractory High Entropy Alloys Powder Manufacturing Process and Thermal Properties of Composites)
NTHU
NDLTD
1.99
耐火高熵合金(Refractory high-entropy alloys)、複合材料(Metal matrix composites)、粉末冶金(Powder metallurgy)、液相燒結(Liquid phase sintering)、熱分析(Thermal analysis)
耐火高熵合...
110
探討微量元...
探討微量元素對 Cu-Ni-Si 合金之微結構與磨耗性質影響 (Study on Microstructure and Wear Properties of Cu-Ni-Si System with Multi-Addition elements)
NTHU
NDLTD
1.99
銅合金(Copper alloy)、熱機處理(Thermomechanical processing)、加工圖(Processing map)、磨耗阻抗(wear resistance)
銅合金(C...
110
臨場分析單...
臨場分析單相BCC高熵合金高溫拉伸強度與變形行為 (In-situ Analyze Tensile Strength and Deformation Behavior of Single-phase BCC High-Entropy Alloys at Elevated Temperature)
NTHU
NDLTD
1.92
高熵合金(high-entropy alloys)、體心立方結構(body-centered cubic)、高溫動態應變時效(high-temperature dynamic strain aging)、臨場高溫機械分析(in-situ high-temperature mechanical analysis)
高熵合金(...
109
中熵銅合金...
中熵銅合金之析出強化相及機械性質探討 (Precipitation strengthening phase and mechanical properties of medium-entropy copper alloys)
NTHU
NDLTD
2.10
中熵銅合金(Medium-entropy copper alloys)、析出強化(Precipitation strengthening)、機械性質(Mechanical properties)
中熵銅合金...
109
單相 FC...
單相 FCC 型耐蝕高熵合金之開發 (Development of FCC Single-Phase Corrosion-Resistant High-Entropy Alloys)
NTHU
NDLTD
1.99
高熵合金(High-entropy alloy)、微結構(Microstructure)、合金設計(Alloy design)、腐蝕(Corrosion)
高熵合金(...
109
探討高熵合...
探討高熵合金之形狀記憶效應與超彈性 (Development and Exploration of Shape Memory Effect and Superelasticity of High-Entropy Alloy)
NTHU
NDLTD
1.99
高熵合金(High-entropy alloy)、形狀記憶合金(Shape memory alloy)、訓練(Training)、超彈性(Superelasticity)
高熵合金(...
108
新型耐火高...
新型耐火高熵合金之開發及其應用 (Development and Application of Refractory High-Entropy Alloys)
NTHU
NDLTD
3.96
高熵合金(high-entropy alloys)、耐火高熵合金(refractory high-entropy alloys)、核能結構材料(nuclear structural materials)
高熵合金(...
108
開發新型 ...
開發新型 η 析出強化相中熵合金 (Development of a Novel η-Precipitate Strengthened Medium-Entropy Alloy)
NTHU
NDLTD
1.96
高/中熵合金(High/Medium-entropy alloy)、微結構(Microstructure)、機械性質(Mechanical properties)
高/中熵合...
107
耐磨耗新型...
耐磨耗新型銅合金之開發 (Development of Innovative Copper Alloys with Superior Wear Resistance)
NTHU
NDLTD
1.92
析出強化型銅合金(precipitation hardened copper alloy)、磨耗阻抗(wear resistance)、導電度(electrical conductivity)、硬度(hardness)、時效硬化(age hardening)
析出強化型...
107
高熵複合材...
高熵複合材料之合金基地相研究 (Research on Matrix of High-Entropy Composite Materials)
NTHU
NDLTD
1.92
耐火高熵合金(Refractory high-entropy alloys)、熱分析(Composites)、複合材料(Mechanical properties)、機械性質(Thermal anaylsis)
耐火高熵合...
107
開發新型鍛...
開發新型鍛造型高熵超合金 (Development of Innovative Wrought High-Entropy Superalloys)
NTHU
NDLTD
1.89
高熵合金(High-entropy alloy)、超合金(Superalloy)、合金設計(Alloy design)、微結構(Microstructure)、機械性質(Mechanical properties)
高熵合金(...
106
微量添加對...
微量添加對非等莫耳AlCrFeMnNi高熵合金之析出相與高溫磨耗性質影響 (Effect of non-equal molar AlCrFeMnNi high-entropy alloys on the precipitates and high-temperature-wear performance by addition of minor elements)
NTHU
NDLTD
1.95
高熵合金(High entropy alloys)、析出強化(Precipitation hardening)、高溫磨耗(High-temperature wear)
高熵合金(...
106
探討 Al...
探討 AlCoCrFeNi 共晶型高熵合金之微結構與機械性質 (Study on microstructure and mechanical property of AlCoCrFeNi eutectic high-entropy alloys)
NTHU
NDLTD
1.95
高熵合金(High-entropy alloys)、共晶合金(Eutectic alloys)、微結構(Microstructure)、機械性質(Mechanical property)
高熵合金(...
106
探討元素添...
探討元素添加對高熵形狀記憶合金影響 (Shape memory effect of multi-elements on the high-entropy alloys)
NTHU
NDLTD
1.87
高熵合金(high-entropy alloy)、形狀記憶合金(shape memory alloy)、高溫形狀記憶合金(high temperature shape memory alloy)
高熵合金(...
105
FCC單相...
FCC單相高熵合金微結構與機械性質之研究 (Study on the microstructure and mechanical property of single FCC phase high-entropy alloys)
NTHU
NDLTD
1.94
高熵合金(High-entropy alloys)、熱機處理(Thermal and mechanical property)、晶粒成長(Grain growth)
高熵合金(...
105
非等莫耳A...
非等莫耳AlCoCrFeNiTi高熵合金微結構及機械性質之研究 (Study on the microstructure and mechanical properties of none equal molar AlCoCrFeNiTi high-entropy alloy)
NTHU
NDLTD
1.94
高熵合金(High entropy alloy)
高熵合金(...