政府計畫（GRB），建議「依年度遞減排序」，以查看最新的研究方向。
| 畢業學年度 | 論文標題 | 連結 | 學位 | 畢業時長(years) |
|---|---|---|---|---|
| 關鍵字 | ||||
| 112 | 應用知識管... 應用知識管理方法於組織失憶預防—以某光電業公司生產企劃部知識文件化為例 (Applying Knowledge Management Method in Organizational Amnesia Prevention: An Empirical Documentation of Production Planning Department in An Optoelectronic Company) | NTHU | 碩 | 無口試日期 |
知識管理(Knowledge Management)、組織失憶(Organizational Amnesia)、知識文件化(Documentation)、個案研究(Case Study) 知識管理(... | ||||
| 112 | 運用狩野及... 運用狩野及重要性績效分析模型提升企業人力資源服務品質項目之實證分析 (Utilizing the Kano and IPA (Importance Performance Analysis) Models to Enhance the Quality of Human Resource Service Items: An Empirical Study) | NTHU | 碩 | 無口試日期 |
員工滿意度(Employee Satisfaction)、員工滿意度衡量(Employee Satisfaction Measurement)、狩野二維品質模式(Kano Two-Dimensional Quality Model)、重要度-表現分析法(Importance-Performance Analysis (IPA)) 員工滿意度... | ||||
| 112 | 結合可解釋... 結合可解釋性深度學習與生成式對抗網路校正運動模糊X光 (Integrate Explainable Deep Learning and Generative Adversarial Networks to Correct Motion Blur X-ray) | NTHU | 博 | 無口試日期 |
運動模糊X光(Motion Blur X-ray)、可解釋性(Explainable)、生成式對抗網路(Generative Adversarial Network)、影像校正(Image Correction)、卷積神經網路(Convolutional Neural Network) 運動模糊X... | ||||
| 112 | 結合電腦視... 結合電腦視覺與人體姿態估計提高實作教育成效：以心肺復甦術為例 (Integrating Computer Vision and Human Pose Estimation to Improve Practical Education Effectiveness: A Case Study of Cardiopulmonary Resuscitation) | NTHU | 碩 | 無口試日期 |
實作教育(Practical Education)、人體動作辨識(Joint Point Information)、ST-GCN++(ST-GCN++)、心肺復甦術(CPR)、視聽覺反饋(Visual Feedback) 實作教育(... | ||||
| 112 | 應用系統模... 應用系統模擬分析料箱式自動倉儲系統績效表現之實證研究 (Utilizing System Simulation to Analyze Performance of Mini-Load Automated Storage and Retrieval System: An Empirical Study) | NTHU NDLTD | 碩 | 1.57 |
料箱式自動倉儲系統(Mini-Load AS/RS)、系統模擬(Simulation)、EIQ分析(EIQ Analysis)、決策支援系統(Decision Supporting System) 料箱式自動... | ||||
| 112 | 結合精實生... 結合精實生產與六標準差在封裝捲帶生產作業效率提升之實證研究 (Integrating Lean Production and Six Sigma Techniques to Improve Productivity of Tape Reel Production Workflow in Packaging Industry-An Empirical Study) | NTHU NDLTD | 碩 | 1.45 |
精實生產(Lean Production)、六標準差(Six Sigma)、價值溪流圖(Value Stream Mapping)、特性要因圖(Cause and effect analysis chart)、無線射頻(Radio-frequency identification) 精實生產(... | ||||
| 111 | 運用深度學... 運用深度學習辨識建立可解釋性輔助診斷系統：以自發性氣胸為例 (Developing a Explanable Diagnosis System Using Deep Learning：A Case Study of Spontaneous Pneumothorax) | NTHU NDLTD | 碩 | 1.89 |
深度學習(Deep Learning)、電腦斷層掃描(Computer Aided Diagnosis)、輔助診斷系統(Computed Tomography)、可解釋性(Explainable Artificial Intelligence)、原發性自發性氣胸(Primary Spontaneous Pneumothorax)、血管穿透缺陷(Vascular-Penetration Defects) 深度學習(... | ||||
| 111 | 結合多目標... 結合多目標決策分析與多屬性決策分析增進決策者之決策績效-以氣候相關財務揭露為例 (Integrating Multi-Objective Decision Analysis and Multi-Attribute Decision Analysis to Improve Decision-Making Performance-A TCFD Case Study) | NTHU NDLTD | 碩 | 1.89 |
多目標決策(MODM)、多屬性決策(MADM)、氣候財務相關揭露(TCFD)、多目標背包模式(Multi-Objective Knapsack Model)、層級分析法(AHP)、逼近理想解排序法(TOPSIS) 多目標決策... | ||||
| 111 | 應用物件偵... 應用物件偵測與自然語言處理建立智能遠距醫療輔助診斷系統：以褥瘡傷口類別辨識系統為例 (Applying Object Detection and Natural Language Processing to Establish a Smart Telemedicine Diagnosis System with Chatbot: a Case Study of Pressure Injuries Diagnosis System) | NTHU NDLTD | 碩 | 1.89 |
深度學習(Deep learning)、物件偵測(Object detection)、聊天機器人(Chatbot)、褥瘡傷口辨識(Pressure injuries identification)、智能遠距醫療輔助診斷系統(Smart telemedicine diagnosis assistance system) 深度學習(... | ||||
| 111 | 基於AHP... 基於AHP框架開發整合自然語言處理與生命週期評估的智能綠色供應商風險評估系統：實證研究 (Developing a Smart Green Supplier Risk Assessment System Integrating Natural Language Processing and Life Cycle Assessment based on AHP framework: An Empirical Study) | NTHU NDLTD | 碩 | 1.87 |
自然語言處理(Natural Language Processing)、生命週期評估(Life Cycle Assessment)、智能綠色供應商風險評估系統(Smart Green Supplier Risk Assessment System)、BERT(BERT)、AHP(AHP) 自然語言處... | ||||
| 111 | 閉環綠色供... 閉環綠色供應鏈中考慮碳排放時租賃產品的定價策略 (Pricing Strategy of a Leased Product When Carbon Emission is Considered in a Closed Loop Green Supply Chain) | NTHU NDLTD | 碩 | 1.87 |
閉環綠供應鏈管理(Closed-Loop Green Supply Chain Management)、領導追隨者結構(Bi-level Programing)、再製造/再處理(Remanufacturing/Reprocessing)、訂價(Pricing)、租賃(Leasing)、多目標二階規劃模型(Multi-criteria 2-Level Optimization Model) 閉環綠供應... | ||||
| 111 | 應用混合機... 應用混合機器學習模型協助中小企業實現自適應之數位轉型方案：以射出成型產業為例 (Applying Hybrid Machine Learning Models to Assist Small and Medium Enterprises in Achieving Self Adaptive Digital Transformation: A Case Study of Injection Molding Industry) | NTHU NDLTD | 碩 | 1.87 |
數位轉型(Digital Transformation)、自適應(Adaptability)、中小企業(Deep Learning)、深度學習(Quality Prediction)、品質預測(Small and Medium Enterprises (SMEs)) 數位轉型(... | ||||
| 111 | 整合深度學... 整合深度學習模型與深度相機達成產線流程自動化：以鞋業為例 (Integrating Deep Learning Models with Depth Camera for Achieving Automated Production Line Processes : A Case Study in Shoe Company) | NTHU NDLTD | 碩 | 1.87 |
智慧製造(Robotic arm)、YOLOv7(Yolov7)、Mask R-CNN(Mask R-CNN)、堆疊物件(stacked objects)、深度相機(depth camera)、模型可解釋性(model interpretability) 智慧製造(... | ||||
| 111 | 利用六標準... 利用六標準差設計提高半導體長晶製程良率之研究 (Utilizing Design for Six Sigma to Improve Yield of Semiconductor Crystal Growth Process) | NTHU NDLTD | 碩 | 1.87 |
長晶製程(ingot growth process)、實驗設計(six sigma design)、PID控制器(PID controller)、模擬軟體(simulation software)、良率提升(yield improvement) 長晶製程(... | ||||
| 111 | 應用狩野二... 應用狩野二維品質模型與重要度-表現分析法探討產科醫療品質與服務改善 (Utilizing Kano Model and Importance-Performance Analysis to Explore Obstetrics Medical Quality and Service Improvement) | NTHU NDLTD | 碩 | 1.87 |
產科醫療服務品質(Kano model)、狩野二維品質模式(Importance performance analysis)、重要度-表現分析法(Quality of obstetric medical service) 產科醫療服... | ||||
| 111 | 導入六標準... 導入六標準差設計與寄售營銷模式提升毛利率–以手機殼製造業B公司為例 (Implementing Design for Six Sigma Process and Consignment Business Model to Improve Gross Profit Rate: An Empirical Study in Mobile Phone Case Manufacturing Industry) | NTHU NDLTD | 碩 | 2.44 |
寄售商業模式(Mobile phone case)、六標準差設計(Design for Six Sigma)、供應鏈管理(ABC Analysis) 寄售商業模... | ||||
| 111 | 利用自然語... 利用自然語言處理方法改善稽核有效性以提升客戶滿意度 (Improving Audit Effectiveness with Natural Language Processing to Enhance Customer Satisfaction) | NTHU NDLTD | 碩 | 1.44 |
自然語言處理(Natural language processing)、深度學習(Deep learning)、品質系統稽核(Quality system audit) 自然語言處... | ||||
| 111 | 改善晶圓測... 改善晶圓測試針痕查檢流程判讀異常 (Improve Probe Mark Inspection Issue in Chip Probing Process) | NTHU NDLTD | 碩 | 1.19 |
晶圓測試(Chip Probing)、電腦視覺(Computer Vision)、物件檢測方法(Image Object Detection Method)、深度學習(Deep Learning) 晶圓測試(... | ||||
| 111 | 以服務設計... 以服務設計手法建立業務查詢平台電子系統提升業務流程效率-以K公司為例 (Implement Service Design Methods to Establish Electronic System of Sales Inquiry Platform for Enhancing Sales Process Efficiency: A Case Study of K Company) | NTHU NDLTD | 碩 | 1.19 |
服務品質(Service Quality)、服務設計(Service Design)、雙鑽石模型(Double Diamond Model) 服務品質(... | ||||
| 111 | 第二型及非... 第二型及非第二型氣喘病人臨床附加使用長效抗膽鹼支氣管擴張劑之療效分析 (Efficacy analysis of clinical LAMA add-on therapy in patients with type 2 and non-type 2 asthma) | NTHU NDLTD | 碩 | 1.19 |
第二型氣喘(Type 2 asthma)、長效抗膽鹼能支氣管擴張劑(LAMA)、嗜酸性球(eosinophilic counts)、急性發作(acute exacerbation) 第二型氣喘... | ||||
| 110 | 運用狩野及... 運用狩野及重要-滿意度模型提升半導體測試廠工程服務品質策略 (Utilizing Kano and Importance-Satisfaction Model to Improve the Engineer Service Quality of a Semiconductor Test Plant) | NTHU NDLTD | 碩 | 6.94 |
半導體測試廠(Semiconductor test plant)、工程服務品質(engineer service quality)、狩野模型(Kano model)、重要度-滿意度模型(importance-satisfaction (I-S) model)、改善係數(improvement index (Ii).) 半導體測試... | ||||
| 110 | 整合深度學... 整合深度學習與演算法以提升可解釋性與績效：實證研究 (An integrated algorithm deep learning model to improve interpretability and performance: An empirical study) | NTHU NDLTD | 碩 | 1.92 |
可解釋模型(Explainable Models)、深度學習(Deep Learning)、分群演算法(Clustering Algorithms)、相似度演算法(Similarity Algorithms)、數位轉型(Digital Transformation) 可解釋模型... | ||||
| 110 | 應用Fas... 應用Faster RCNN和BERT模型在租車業智慧化產品服務系統中建立個人化景點推薦系統 (Apply Faster RCNN and BERT Model to Build a Personalized Attraction Recommendation Agent in A Smart Product Service System of the car rental industry) | NTHU NDLTD | 碩 | 1.92 |
智慧化產品服務系統(Smart product service system)、物件偵測(object detection)、自然語言處理(natural language processing)、深度學習(deep learning)、推薦系統(recommendation system)、個人化(personalization) 智慧化產品... | ||||
| 110 | 開發台灣失... 開發台灣失智症創新服務 (Develop Innovative Services for Dementia： A Case Study of Taiwan Patients) | NTHU NDLTD | 碩 | 2.88 |
以使用者為中心(User-centered)、服務設計(Service Design)、失智症(Dementia)、COVID-19(COVID-19) 以使用者為... | ||||
| 110 | 基於TCF... 基於TCFD架構建立多目標背包模式於實際企業永續經營方案選擇 (A Multi-Objective Knapsack Model Based on TCFD for Organization Sustainable Management Project Selection With an Empirical Study) | NTHU NDLTD | 碩 | 1.88 |
氣候相關財務揭露建議(TCFD)(TCFD)、企業永續經營方案選擇(Sustainable business operations)、氣候機會與風險(Opportunities and risk)、多目標背包模式(MOMK)(Multi-Objective Knapsack Model (MOKM)) 氣候相關財... | ||||
| 110 | 整合電腦視... 整合電腦視覺及生理資訊建立智能警示系統 (Integrate Computer Vision and physiological information to establish an intelligent driving warning system) | NTHU NDLTD | 碩 | 1.88 |
深度學習(deep learning)、YOLOv5(YOLOv5)、駕駛安全檢測(driving safety detection)、駕駛行為(driving behavior)、車禍預防(car accident prevention)、生理資訊(physiological information) 深度學習(... | ||||
| 110 | 應用層級分... 應用層級分析法及逼近理想解排序法評估海外投資設廠 – 以Q公司為例 (Apply AHP and TOPSIS to Evaluate Overseas Investment and Establishment of Manufacturing Site：An Example of Q Company.) | NTHU NDLTD | 碩 | 6.88 |
層級分析法(AHP (Analytic Hierarchy Process))、逼近理想解排序法(TOPSIS (Technique for Order Preference by Similarity to Ideal Solution))、海外投資設廠(Overseas Investment) 層級分析法... | ||||
| 110 | 應用系統模... 應用系統模擬優化先進封裝製程自動化佈局規劃 (Utilizing System Simulation to Optimize Advanced Packaging Process Automated Layout) | NTHU NDLTD | 碩 | 1.88 |
半導體(semiconductor)、自動化傳送系統(AMHS)、設施佈局(layout)、系統模擬(simulation) 半導體(s... | ||||
| 110 | 半導體測試... 半導體測試設備訂製開發的流程改善 (Design Process Improvement for Customized Semiconductor Test Equipment) | NTHU NDLTD | 碩 | 0.88 |
訂製化設備(Product platform)、產品平台(Product family)、產品家族(Project Management KPIs)、專案管理關鍵績效指標(SQCD method)、SQCD手法(undefined) 訂製化設備... | ||||
| 110 | 應用限制理... 應用限制理論在產效管理改善 -以發光二極體封裝A公司為例 (Applying Theory of Constraints to Improve Productivity Management-A Case Study of LED Packaging Company) | NTHU NDLTD | 碩 | 5.49 |
限制理論(Theory of Constraints)、IDEF(IDEF)、產效(Productivity)、發光二極體(LED) 限制理論(... | ||||
| 110 | 驗證深度學... 驗證深度學習軟體準確率於不同行動裝置穩定性之實證研究 (Verify the Accuracy of Deep Learning Software on the Stability of Different Mobile Devices: An Empirical Study) | NTHU NDLTD | 碩 | 1.49 |
軟體品質(Software)、自動化測試(quality)、深度學習(automated)、呼吸音(testing) 軟體品質(... | ||||
| 110 | 應用六標準... 應用六標準差方法改善流感病患住院治癒療效 (Applying Six Sigma Method to Improve Curative Effect of Influenza Patients in a Hospital) | NTHU NDLTD | 碩 | 2.28 |
流感(Influenza)、品管七大手法(QC Seven techniques)、六標準差(Six Sigma Method) 流感(In... | ||||
| 110 | 應用機器學... 應用機器學習演算法預測工作者腦心血管疾病風險 (Applying Machine-Learning Algorithms to Predict Workers' Risk of Cardiovascular Disease) | NTHU NDLTD | 碩 | 1.28 |
腦心血管疾病(Cerebral Cardiovascular Disease)、機器學習(Machine learning)、風險指標(Risk indicators) 腦心血管疾... | ||||
| 109 | 應用8D改... 應用8D改善流程提升半導體封裝設備穩定性 (Applying Eight Disciplines Problem Solving Process to Enhance the Stability of Semiconductor Package Equipment) | NTHU NDLTD | 碩 | 2.00 |
8D(Eight Disciplines Problem Solving (8D))、半導體(Semiconductor)、封裝(Packaging)、穩定性(Stability)、QC七大手法(QC Seven Tools) 8D(Ei... | ||||
| 109 | 應用深度學... 應用深度學習技術開發氣候相關財務揭露建議的區域模型：以美國為例 (Utilizing Deep Learning Method to Develop a Regional Model of TCFD: A Case Study of United States) | NTHU NDLTD | 碩 | 1.88 |
氣候相關財務揭露建議報告(TCFD)、氣候變遷(Climate change)、財務及風險管理(Finance and risk management)、文字探勘(Text mining)、深度學習(Deep Learning) 氣候相關財... | ||||
| 109 | 結合人工智... 結合人工智慧與遊戲化理論促進綠色消費行為 (Integrating Artificial Intelligence and Gamification Theory to Promote Green Consumption Behavior) | NTHU NDLTD | 碩 | 1.88 |
食物碳足跡(Food Carbon Footprint)、深度學習食物圖像辨識(Food Image Recognition with Deep Learning)、綠色消費與飲食行為改變(Green Consumption and Eating Behavior Change)、遊戲化理論(Gamification Theory) 食物碳足跡... | ||||
| 109 | 應用資料增... 應用資料增強與基於Mask R-CNN的實例切割方法於晶圓圖混合型態缺陷圖樣分類 (Applying Data Augmentation and Mask R-CNN-based Instance Segmentation Method for Mixed-Type Wafer Maps Defect Patterns Classification) | NTHU NDLTD | 碩 | 1.87 |
Mask R-CNN(Mask R-CNN)、資料增強(Data Augmentation)、缺陷圖樣分類(Defect Pattern Recognition)、半導體製造(Semiconductor Manufacturing)、晶圓圖(Wafer Map) Mask ... | ||||
| 109 | 應用8D問... 應用8D問題解決法提升機台利用率-以半導體公司為例 (Utilizing Eight Disciplines problem solving procedure to Improve Machine Availability – A Case Study of a Semiconductor Company.) | NTHU NDLTD | 碩 | 2.82 |
8D問題解決法(Eight Disciplines problem solving)、機台使用率(Machine Availability)、晶圓代工(Semiconductor manufacturing) 8D問題解... | ||||
| 109 | 基於關鍵因... 基於關鍵因素提升沼氣預測準確率的混合機器學習模型 (Hybrid machine learning model based on key factors to improve the accuracy of biogas prediction) | NTHU NDLTD | 碩 | 1.82 |
深度學習(deep learning)、循環經濟(circular economy)、能源(energy)、隨機森林(random forest)、長短期記憶(long short-term memory) 深度學習(... | ||||
| 109 | 混合區域卷... 混合區域卷積神經網絡對堆疊目標的定向物件偵測新方法 (A Novel Directional Object Detection Method on Piled Object Based on Hybrid Region-Based Convolutional Neural Network) | NTHU NDLTD | 碩 | 1.82 |
堆疊物體(Piled Object)、深度學習(Deep Learning)、定向目標偵測(Directional Object Detection)、智慧製造(Smart Manufacturing) 堆疊物體(... | ||||
| 109 | 成人靜脈-... 成人靜脈-動脈葉克膜期間電腦斷層顯影劑在腹部動靜脈顯影的發現 (The Watershield Phenomenon of Contrasted Computed Tomography Abdomen Scanning in Adult Venous-Arterial ECMO) | NTHU NDLTD | 碩 | 0.82 |
葉克膜(ECMO)、電腦斷層(CT Scanning)、顯影劑(Contrast Dose) 葉克膜(E... | ||||
| 109 | 應用六標準... 應用六標準差方法提升國際航空業碳抵換及減量計畫之績效-以台灣為例 (Applying Six Sigma Method to Improve the Performance of the Carbon Offset and Reduction for International Aviation Program-A Case of Taiwan) | NTHU NDLTD | 碩 | 1.49 |
CORSIA(CORSIA)、決策樹(Decision Tree)、六標準差(Six Sigma)、碳抵換(Carbon Offset) CORSI... | ||||
| 109 | 整合同步工... 整合同步工程與六標準差設計開發晶片測試探針-以高頻測試探針為例 (Integrate Concurrent Engineering Technique and Six Sigma Framework to Develop Test Probe Device – A Case study of High Frequency Test Probe Device) | NTHU NDLTD | 碩 | 1.49 |
探針(Probes)、六標準差(Six Sigma)、同步工程(Concurrent Engineering)、實驗設計(Design of Experiment) 探針(Pr... | ||||
| 109 | 應用六標準... 應用六標準差設計架構與創意發想方法改善分類機異常 (Apply Six Sigma Framework and Innovative Method to Improve Handler Anomaly) | NTHU NDLTD | 碩 | 1.49 |
創意設計發想方法(Innovative)、分類機(Handler)、六標準差(Six Sigma)、六頂思考帽(Six Thinking Hats)、CMOS影像感測晶片(CMOS Image sensor) 創意設計發... | ||||
| 108 | 應用影像辨... 應用影像辨識方法於車牌辨識系統之實證研究 (Appy Computer Vision Method in License Plate Image Recognition) | NTHU NDLTD | 碩 | 2.00 |
影像處理(Computer Vision)、深度學習(Deep Learning)、YOLO(YOLO)、車牌辨識(Plate Recognition) 影像處理(... | ||||
| 108 | 以服務設計... 以服務設計手法導入醫院電子病歷同意書流程 (Implement Service Design Methods to Paperless Process of Electronic Medical Records Consents: An Empirical Study of Hospital System) | NTHU NDLTD | 碩 | 2.00 |
以使用者為中心(User-centered)、服務設計(Service Design)、電子病歷(Electronic Medical Record)、雙鑽石模型(Double Diamond Design Process) 以使用者為... | ||||
| 108 | 基於萃智趨... 基於萃智趨勢辨識商業策略創新機會 (Opportunity Identification of Business Strategy Innovation Based on TRIZ Trends) | NTHU NDLTD | 碩 | 1.96 |
萃智(TRIZ)、系統化創新(systematic innovation)、商業模式(Business model)、商業趨勢(Business trends)、商業策略辨識(Business strategy identification) 萃智(TR... | ||||
| 108 | 基於功能階... 基於功能階層及關聯系統展開的專利擴張法 (Patent Expansion Based on Function Hierarchy and System Association) | NTHU NDLTD | 碩 | 1.96 |
效應/資源資料庫(TRIZ)、萃智(TRIZ)(function analysis)、功能樹(systematic innovation)、功能分析(effects and resources database)、系統性創新(function tree)、關聯系統(system association)、功能要素(patent expansion) 效應/資源... | ||||
| 108 | 運用六標準... 運用六標準差與實驗設計改善太陽能電池電致發光不良率 (Apply Six Sigma and Experimental Design to Reduce the Defect Rate of Electroluminescence in Solar Cells) | NTHU NDLTD | 碩 | 2.87 |
六標準差(Six Sigma)、實驗設計(Design of Experiment)、太陽能電池(solar cells)、電致發光(Electroluminescence) 六標準差(... | ||||
| 108 | 於智慧電網... 於智慧電網架構下開發一套以深度學習為基礎之家戶用電量概率式預測模型 (A Deep Learning-based Probabilistic Prediction Model for Household Electricity Consumption under the Smart Grid Architecture) | NTHU NDLTD | 碩 | 1.87 |
深度學習(deep learning)、混合模型(hybrid model)、能源(energy)、概率預測(probabilistic forecasting) 深度學習(... | ||||
| 108 | 整合深度學... 整合深度學習技術在智慧化產品服務系統中開發個人化推薦系統 (Integrate deep learning methods to develop a personalized recommendation system in a smart product service system) | NTHU NDLTD | 碩 | 1.87 |
智慧化產品服務系統(Smart Product Service System)、推薦系統(Recommendation System)、文字探勘(Natural Language Processing)、機器學習(Machine Learning) 智慧化產品... | ||||
| 108 | 運用六標準... 運用六標準差設計架構提升產品測試穩定性-以壓塊物件為例 (Utilize Design for Six Sigma Framework to Improve Stability of Product Test - A Case of Tooling Block) | NTHU NDLTD | 碩 | 1.87 |
分類機(Handler)、六標準差設計(Design For Six Sigma)、田口實驗(Taguchi experiment)、模擬(Simulation) 分類機(H... | ||||
| 108 | 創新前饋-... 創新前饋-回饋批次控制器以推動工業3.5聰明生產與半導體製造之實證研究 (A Novel Feedforward-Feedback Run-to-Run Controller to Empower Industry 3.5 Smart Production and an Empirical Study for Semiconductor Manufacturing) | NTHU NDLTD | 碩 | 1.82 |
批次控制(R2R Control)、前饋控制(Feedforward Control)、比例-積分控制器(PI Controller)、關鍵尺寸(Critical Dimension)、工業3.5(Industry 3.5)、聰明生產(Smart Production) 批次控制(... | ||||
| 108 | 雙目標非凌... 雙目標非凌越型排序基因演算法以推動工業3.5聰明生產與高科技機能布染機指派之實證研究 (Non-dominated Sorting Genetic Algorithm to Empower Industry 3.5 Smart Production and an Empirical Study for Optimizing Dyeing Machine Allocation for High-tech Functional Textile) | NTHU NDLTD | 碩 | 1.82 |
工業3.5(Industry 3.5)、聰明生產(Smart Production)、不平衡指派問題(Imbalanced assignment problem)、非凌越型排序基因演算法(Non-dominated sorting genetic algorithm)、染整產業(Dyeing industry) 工業3.5... | ||||
| 108 | 基於機器學... 基於機器學習之參數優化於先進製程控制及實證研究_以IC封裝為例 (Advanced Process Control using Machine Learning-Based Parameter Optimization and Empirical Study of IC Packaging Industry) | NTHU NDLTD | 碩(提早入學) | 1.88 |
機器學習(Machine Learning)、良率提升(Yield Enhancement)、參數優化(Parameter Optimization)、大數據分析(Data Analytics)、IC封裝(IC Packaging)、先進製程控制(Advanced Process Control)、智慧製造(Intelligent Manufacturing) 機器學習(... | ||||
| 108 | 應用工業 ... 應用工業 3.5 策略建構基因-禁忌演算法之煉鋼排程最佳化及實證研究 (A GA-Tabu algorithm for steel-making scheduling: An empirical study of Industry 3.5) | NTHU NDLTD | 碩(提早入學) | 1.88 |
煉鋼排程(limited waiting time constraint)、基因演算法(genetic algorithm)、連續鑄造(steel making scheduling)、最小等待時間(undefined) 煉鋼排程(... | ||||
| 108 | 整合基於圖... 整合基於圖形內容的檢索與深度學習於晶圓圖模式分類之方法 (Integrate Content-Based Image Retrieval and Deep Learning to Improve Wafer Map Defect Patterns Classification) | NTHU NDLTD | 碩 | 2.32 |
半導體(semiconductor)、晶圓圖(wafer map)、缺陷模式(defect pattern)、圖片辨識(pattern recognition)、模板匹配(CBIR)、影像處理(image processing) 半導體(s... | ||||
| 108 | 應用機器學... 應用機器學習進行預測性維護與產能優化於虛實整合系統 (An Integrative Machine Learning Method to Achieve Predictive Maintenance and Improve Productivity Performance in a Cyber Physical System) | NTHU NDLTD | 碩 | 3.29 |
虛實整合系統(Cyber physical system)、錯誤偵測(Fault detection)、隨機森林(Random forest)、長短記憶神經網路(Long short-term memory)、預測性維護(Predictive maintenance) 虛實整合系... | ||||
| 108 | 整合失效模... 整合失效模式與實驗設計方法改善前列腺肥大症增生伴隨的排尿障礙藥品溶離 (Integrate FMEA mode and Design of Experiment to improve the dissolution of dysuria caused by prostatic hyperplasia) | NTHU NDLTD | 碩 | 1.29 |
FMEA(Failure Mode And Effect Analysis)、心智圖(Mind Maps)、實驗設計(Design of Experiment)、前列腺肥大(Benign Prostatic Hyperplasia)、溶離(Dissolution) FMEA(... | ||||
| 108 | 應用六標準... 應用六標準差設計架構開發新設備-以測試機散熱模組為例 (Apply Six Sigma Framework to Develop New Equipment – A Case Study of Cooling Module Design Test Machine) | NTHU NDLTD | 碩 | 1.29 |
測試機(Tester)、六標準差設計(Design For Six Sigma)、田口實驗(Taguchi experiment)、架構開發(Equipment Design) 測試機(T... | ||||
| 107 | 利用文字分... 利用文字分析與機器學習建立數據驅動之智慧產品服務系統 (Develop a Data-driven Smart Product Service System Framework Utilizing Text Analytics and Machine Learning) | NTHU NDLTD | 碩 | 1.88 |
智慧產品服務系統(Smart Product Service System)、服務藍圖(Text Analytics)、文字分析(Machine Learning)、機器學習(Service Blueprint) 智慧產品服... | ||||
| 107 | 技術創新與... 技術創新與產品開發績效之研究：以IC設計公司為例 (Technology Innovation and Product Development Performance: Empirical Study of IC Design Houses) | NTHU NDLTD | 碩 | 4.89 |
技術創新(Technological innovation)、創新績效(Innovation performance)、類比IC設計(Analog IC design) 技術創新(... | ||||
| 107 | 減少空氣汙... 減少空氣汙染之下的跨區域與季節性電力規劃模型- 以台灣為例 (Cross-Regional and Seasonal Power Planning Model under Air Pollution Reduction: A Case Study of Taiwan) | NTHU NDLTD | 碩 | 1.89 |
發電配比(Power generation)、折衷規劃法(Compromise programming)、空氣污染(Air pollution)、電力調度(Power dispatching)、台灣案例(Case of Taiwan) 發電配比(... | ||||
| 107 | 運用雙層規... 運用雙層規劃求解異質工業用戶在需量反應賽局中之差異電價擬定 (Using bi-level optimization to solve discriminative electricity pricing problem with industrial users in a demand response game) | NTHU NDLTD | 碩 | 1.89 |
缺電(power shortage)、備轉容量(operating reserve)、需量反應(demand response)、電價補償(power usage deduction)、賽局理論(price compensation) 缺電(po... | ||||
| 107 | 評估軟體即... 評估軟體即服務概念-以微軟雲端服務為例 (Investigate Customer Satisfaction of Software as a service (SaaS) in Clouding Service: Microsoft Windows® Case Study) | NTHU NDLTD | 碩 | 1.89 |
雲端服務(Cloud Service)、軟體即服務(SaaS)(Software as a Service (SaaS))、Windows即服務(WaaS)(Windows as a Service (WaaS))、SaaS服務品質(SaaS-Qual)(SaaS-Qual) 雲端服務(... | ||||
| 107 | 醫療資訊系... 醫療資訊系統服務品質模型探討服務品質與員工滿意度之研究－以Ｃ醫院為例 (Hospital Information System Service Quality and Employee Satisfaction: a Case Study of C Hospital) | NTHU NDLTD | 碩 | 1.89 |
醫療資訊系統(Hospital Information Systems)、服務品質(Service Quality)、心理負荷(Mental Workload)、系統可用性(System Usability)、員工滿意度(Employee Satisfaction) 醫療資訊系... | ||||
| 107 | 應用敏捷開... 應用敏捷開發管理方式重構企業服務總線資訊平臺 –以某會員平台為例 (Apply Agile Development Method: to Reconstruct a IT System with Enterprise Service Bus (ESB): A Case Study of a Customer Relationship Management (CRM) System) | NTHU NDLTD | 碩 | 6.89 |
專案管理(Project management)、敏捷開發(Agile development)、平衡計分卡(Scrum)、軟體工程(Balanced ScroeCard) 專案管理(... | ||||
| 107 | 運用精實六... 運用精實六標準差結合虛實整合系統以提升太陽能電池網板使用壽命 (Implementing Lean Six-Sigma with CPS to extend the life time of solar cell printing screen) | NTHU NDLTD | 碩 | 3.89 |
太陽能電池(Solar Cell)、精實六標準差(Lean Six-sigma)、虛實整合系統(CPS)、使用壽命(Life Time)、成本改善(Cost Reduction) 太陽能電池... | ||||
| 107 | 應用迴歸分... 應用迴歸分析與田口方法提升測試良率：以K公司為例 (Apply Regression Analysis and Taguchi Method to Improve Test Yield: – a Case Study of K Company) | NTHU NDLTD | 碩 | 1.75 |
微機電系統技術(MEMS)、陀螺儀(Gyroscope)、測試分類機(Taguchi Method)、田口方法(Regression Analysis)、迴歸分析(undefined) 微機電系統... | ||||
| 107 | 應用醫療照... 應用醫療照護失效模式與效應分析降低外送檢體錯誤率-苗栗縣竹南鎮衛生所為例 (Apply Healthcare Failure Mode and Effect Analysis to Reduce the Error Rate of Delivery Samples –A Case Study of Health Center at Zhunan Township in Miaoli County) | NTHU NDLTD | 碩 | 1.75 |
病人安全(Patient Safety)、衛生所檢驗流程(Inspection process)、醫療照護失效模式與效應分析(HFMEA)、特性要因分析圖(Cause and Effect Diagram)、5W2H(5W2H) 病人安全(... | ||||
| 107 | 製造企業轉... 製造企業轉型工業互聯網的策略研究 - 以H科技集團為例 (Research on Business Transformation Strategy of Manufacturing into the Industrial Internet : A Case Study of H Technology Group.) | NTHU NDLTD | 碩 | 4.63 |
企業轉型(Business Transformation)、商業模式(Business Model)、價值主張(Value Proposition)、工業互聯網(Industrial Internet)、工業4.0(Industry 4.0)、智能製造(Intelligent Manufacturing)、工業物聯網(Industrial Internet of Things) 企業轉型(... | ||||
| 107 | 結合精實管... 結合精實管理及隨機規劃模型應用在醫療系統改善：以健檢中心為例 (Integrate Lean Management and Stochastic Programming Model to Improve Healthcare System: A Case Study of Physical Examination Center) | NTHU NDLTD | 碩 | 2.44 |
精實管理(Lean management)、隨機規劃模型(Stochastic programming model)、蟻群演算法(Ant colony algorithm)、醫療系統(Healthcare system)、健檢中心(Physical examination center) 精實管理(... | ||||
| 107 | 結合失效模... 結合失效模式與效應分析、故障樹分析與萃智理論提升設備績效之研究 (Combining Failure Modes & Effects Analysis,Fault Tree Analysis and TRIZ Theory to Improve Equipment Preformance) | NTHU NDLTD | 碩 | 4.41 |
製程改善(Process Improvement)、失效模式與效應分析(Failure Modes and Effects Analysis)、故障樹分析(Fault Tree Analysis)、萃思(TRIZ) 製程改善(... | ||||
| 107 | 全通路系統... 全通路系統下運用人工智慧以達到精準行銷–以共享廚房平台為例 (Applying Artificial Intelligence to Achieve Precision Marketing in an Omni-Channel System – A Case Study of a Shared Kitchen Platform) | NTHU NDLTD | 碩(提早入學) | 1.82 |
全通路(Omni-channel)、人工智慧(Artificial Intelligence)、精準行銷(Precision Marketing)、卷積神經網路(Convolutional Neural Networks) 全通路(O... | ||||
| 106 | 運用萃智方... 運用萃智方法於半導體晶圓測試機台之研究 (Applying TRIZ Method in Semiconductor Wafer Testing Equipment) | NTHU NDLTD | 碩 | 3.00 |
萃智(TRIZ)、晶圓測試設備(Wafer Test Equipment)、分析層級程序法(Analytic Hierarchy Process(AHP)) 萃智(TR... | ||||
| 106 | 在虛實整合... 在虛實整合系統中應用隨機森林和可拓類神經網路改善良率及預防性診斷之實證研究 (Utilizing Random Forest and Extension Neural Network to Improve Yield and Fault Diagnosis in Cyber Physical System: Two Empirical Studies) | NTHU NDLTD | 碩 | 2.00 |
工業4.0(Industry 4.0)、可拓類神經網路(Extension neural network)、虛實整合系統(Cyber physical system)、隨機森林(Random forest) 工業4.0... | ||||
| 106 | 整合限制理... 整合限制理論與模糊多準則決策改善跨境電子商務的績效 (Integrating Theory of Constraints (TOC) and Fuzzy Multiple Criteria Decision Making (FMCDM) to Improve Performance of Cross-border E-commerce) | NTHU NDLTD | 碩 | 2.00 |
跨境電子商務(Cross-border E-commerce)、限制理論(Theory of Constrains)、模糊理論(Fuzzy theory)、多準則決策(Multiple Criteria Decision Making)、區塊鏈(Blockchain) 跨境電子商... | ||||
| 106 | 應用資訊模... 應用資訊模型於介面設計之方法-以跨平台介面為例 (An information model based interface design method: a case study of cross channel platform interface) | NTHU NDLTD | 碩 | 1.83 |
介面設計(User Interface design,)、資訊模型(Information model)、網路層級分析法(Analytic network process)、易用性測試(Usability testing)、訊息理論(Information quantity theory) 介面設計(... | ||||
| 106 | 應用資料分... 應用資料分析構建智慧型良率偵測和診斷分析系統：半導體代工廠之實證研究 (Constructing an Intelligent Yield Detect and Diagnostic Analysis system via Data analysis: an Empirical Study of a Semiconductor Foundry) | NTHU NDLTD | 碩 | 1.83 |
大數據(big data)、資料探勘(data mining)、智慧製造(smart manufacturing)、異常良率偵測(anomaly yield detection)、異常良率診斷(anomaly yield diagnostic)、良率改善(yield improvement)、半導體製造(semiconductor manufacturing) 大數據(b... | ||||
| 106 | 結合精實六... 結合精實六標準差與田口方法提升TFT-LCD生產效率-以H廠為例 (Implementing Taguchi Method and Lean Six Sigma of TFT-LCD-A Case Study of H Manufacturing Company) | NTHU NDLTD | 碩 | 2.24 |
精實六標準差(Lean Six Sigma)、田口方法(Taguchi method)、面板(TFT-LCD)、產能提升(Capacity Expansion)、良率改善(Yield Improvement) 精實六標準... | ||||
| 105 | 應用目標規... 應用目標規劃於產品包裝系統之組裝性與永續性 (Applying Goal Programming to Achieve Assemblability and Sustainability of a Product Packaging System) | NTHU NDLTD | 碩 | 2.99 |
產品包裝系統(product packaging system)、裝配設計(Design for Assembly (DFA))、混和整數規劃(mixed-integer programming)、目標規劃(goal programming) 產品包裝系... | ||||
| 105 | 設計一個人... 設計一個人化腦機介面─以開發樂高機器人腦機介面為例 (Design a Personalized Brain-Computer Interface with a Lego Robot Case) | NTHU NDLTD | 碩 | 1.93 |
腦機介面(Brain-Computer Interface)、數據分析(Data Analysis)、以使用者為中心設計方法(User-Centered Design Method)、使用性測試(Usability Testing)、個人化(Personalization) 腦機介面(... | ||||
| 105 | 應用多代理... 應用多代理人系統於設計個人化產品服務系統 (Design a Personalized Product Service System Utilizing Multi-Agent System) | NTHU NDLTD | 碩 | 1.93 |
產品服務系統(product service system)、多代理人系統(multi-agent system)、服務工程(personalization)、個人化(pervasive computing)、普及運算(undefined) 產品服務系... | ||||
| 105 | 應用文字探... 應用文字探勘及感性工學協助數據導向之設計自動化 (Utilizing Text Mining and Kansei Engineering to Support Data-driven Design Automation) | NTHU NDLTD | 碩 | 1.93 |
文字探勘(Text mining)、感性工學(Kansei engineering)、產品開發過程(Product development process)、設計自動化(Design automation)、數據導向之設計(Data-driven design) 文字探勘(... | ||||
| 105 | 應用資料包... 應用資料包絡分析法建構跨廠間績效評估模式:以面板業模組製造工廠為例 (Implementing Data Envelope Analysis to Construct Efficiency Evaluation Models for Productions Sites: A LCD Module Case Study) | NTHU NDLTD | 碩 | 0.93 |
績效評估(Performance indicator)、資料包絡分析(Data Envelopment Analysis (DEA))、面板業(TFT LCD Industry)、模組製造(undefined) 績效評估(... | ||||
| 105 | 智慧財產權... 智慧財產權保護的系統性判斷機制:專利或營業秘密 (A Systematic Mechanism for on Intellectual Property Protection: The Selection between Patent and Trade Secret) | NTHU NDLTD | 碩 | 0.93 |
專利(Patent)、營業秘密(Trade Secret)、選擇(Analytic Hierarchy Process (AHP))、分析層級程序法(Decision Support System)、決策支援系統(undefined) 專利(Pa... | ||||
| 105 | 應用資料挖... 應用資料挖礦方法於健檢資料之實證研究 (Applying Data Mining Approaches to an Empirical Study of Physical Examination Dataset) | NTHU NDLTD | 碩 | 1.91 |
健康檢查(Physical Examination)、隨機森林演算法(Random Forest Algorithm)、不完整資料(Incomplete Dataset)、模糊c-medoids分群演算法(Fuzzy C-medoids Clustering)、部分距離策略(Partial Distance Strategy) 健康檢查(... | ||||
| 105 | 應用萃智方... 應用萃智方法與理論之研究於「彈性組合之半導體元件分類測試系統」設計:以K公司為例 (Application of TOP-TRIZ method in Design of “flexible combination of semiconductor components handler Equipment: ” – a case study for K company) | NTHU NDLTD | 碩 | 1.91 |
萃智(TRIZ)、分類機(Handler)、測試分類機(Testing Handler) 萃智(TR... | ||||
| 105 | 應用精實六... 應用精實六標準差手法提升IC載板在微小凸塊間距的封裝良率 (Implementing Lean Six Sigma to improve the assembly yield of micro bump pitch IC substrate) | NTHU NDLTD | 碩 | 1.65 |
精實(Lean)、六標準差(Six Sigma)、精實六標準差(Lean Six Sigma)、IC載板(IC substrate) 精實(Le... | ||||
| 105 | 影像感測器... 影像感測器新產品開發效能測試解決方案-以K公司為例 (Image Sensor New device development cost effectiveness solution for K company case study) | NTHU NDLTD | 碩 | 1.46 |
IC測試(IC Testing)、互補性氧化金屬氧化物半導體影像感測器(CMOS Image Sensor (CIS))、影像感測器測試(Image Sensor Test)、分析層級程序法(Analytic Hierarchy) IC測試(... | ||||
| 104 | 探討IC設... 探討IC設計服務公司矽智財開發策略基於技術地圖-以G公司DDR產品為例 (A Study of Silicon IP Development Strategy of IC Design Service Based on Technology Roadmap – A Case Study of DDR Product in G Company) | NTHU NDLTD | 碩 | 無口試日期 |
IC設計服務(IC Design House)、矽智財元件(Silicon Intellectual Property)、技術地圖(Product Roadmap)、開發策略(Development Strategy) IC設計服... | ||||
| 104 | 應用萃智與... 應用萃智與多屬性效用理論發展技術性強化產品-以碳水化合物檢測裝置原型為例 (Applying TRIZ and Multi-Attribute Utility Theory to Develop a Technical Intensive Product with an Empirical Study of Prototype of a Carbohydrate Detecting Device) | NTHU NDLTD | 碩(提早入學) | 無口試日期 |
糖尿病(Diabetes)、萃智(Theory of Inventive Problem Solving (TRIZ))、多屬性效用理論(Multi-Attribute Utility Theory (MAUT))、高光譜影像(Hyperspectral Imaging)、光場相機(Light Field Camera) 糖尿病(D... | ||||
| 104 | 結合結構方... 結合結構方程模型與服務設計於門診病患友善醫療照護服務 (Applying Structural Equation Modeling and Service Design to Develop Clinic Patient-friendly Healthcare Service) | NTHU NDLTD | 碩 | 無口試日期 |
醫療照護(Healthcare)、結構方程模型(Service design)、服務設計(Patient-friendly)、二型糖尿病(Structural equation modeling)、病患友善(Type 2 diabetes) 醫療照護(... | ||||
| 104 | 應用約略集... 應用約略集合理論於產品服務系統分類以協助服務轉型 (Supporting Service Transformation by Applying Rough Set Theory to Product Service System Typology) | NTHU NDLTD | 碩 | 無口試日期 |
產品服務系統(Product service system)、產品服務系統分類(PSS classification)、服務轉型(service transformation)、約略集合理論(rough set theory) 產品服務系... | ||||
| 104 | 以疾病預防... 以疾病預防為目標初探新竹科學園區工程師可能罹患疾病趨向 (Detection of Possible Diseases of the Engineers in the Hsinchu Science Park Based on the Object of Disease Prevention) | NTHU NDLTD | 碩 | 無口試日期 |
預防醫學(Preventive medicine)、新陳代謝症候群(Metabolic syndrome)、體檢報告(Physical examination report) 預防醫學(... | ||||
| 104 | 結合服務藍... 結合服務藍圖與FMEA改善服務品質 ﹣以IC檢測服務企業為例 (Combining Service Blueprint and FMEA to Improve Service Quality ﹣A Case Study of IC Verification and Analysis Firm) | NTHU NDLTD | 碩 | 無口試日期 |
服務藍圖(Service blueprint)、失效模式與分析(FMEA)、服務品質(Service Quality)、商業模式(Business Model)、半導體產業(Semiconductor Industry) 服務藍圖(... | ||||
| 104 | 使用萃智工... 使用萃智工具與層級分析法改善面板廠Cell Test製程良率與庫存 (Apply TRIZ and AHP to Improve Cell Test Yield and Reduce Inventory) | NTHU NDLTD | 碩 | 無口試日期 |
萃智(TRIZ)、層級分析法(AHP)、面板(TFT-LCD)、CELL 製程(CELL Process) 萃智(TR... | ||||
| 104 | 推行精實六... 推行精實六標準差以改善新產品開發流程：網路設備公司之實証研究 (Deploying Lean Six Sigma to Improve New Product Development Process: An Empirical Study of Internet Device Company) | NTHU NDLTD | 碩 | 無口試日期 |
精實生產(Lean Production)、六標準差(Six Sigma)、精實六標準差(Lean Six Sigma)、新產品開發(New Product Development)、網路通訊(Internet Communication) 精實生產(... | ||||
| 103 | 探討大量客... 探討大量客製之生產自動化成效-以手機製造商之測試自動化為例 (A Study on the Effects of Production Automation for Mass Customization -A Case Study of Smart Phone Producer Testing Automation) | NTHU NDLTD | 碩(提早入學) | 無口試日期 |
大量客製化(mass customization)、模組化(flexibility)、彈性(modularization)、自動化(automation) 大量客製化... | ||||
| 103 | 以制度、組... 以制度、組織及文化三構面分析-企業推導品管圈的關鍵成功因素 (The Key Factors for Enterprise to Promote Successful Quality Control Circle in Institution, Organization and Culture Perspective) | NTHU NDLTD | 碩 | 無口試日期 |
關鍵成功因素、全面品質管理、品管圈、企業制度、企業組織、企業文化 關鍵成功因... | ||||
| 103 | 提升新產品... 提升新產品技術移轉成效之分析- 以記憶體公司SSD產品為例 (Exploring The Enhancement Of Technology Transfer In New Product Release- A Case Study Of A Memory Company’s SSD Products) | NTHU NDLTD | 碩 | 無口試日期 |
技術移轉(Technology Transfer)、知識移轉(Knowledge Transfer)、關鍵成功因素(Key Success Factor)、技術管理(Technology Management) 技術移轉(... | ||||
| 103 | 運用穩健設... 運用穩健設計方法提升光學模組設計與開發之效益—以背光模組為例 (Using Robust Design Methodology to Enhance the Performance of Optical Module Design and Development-—A Case Study of Backlight Modules) | NTHU NDLTD | 碩 | 無口試日期 |
穩健設計方法(Robust Design Methodology)、光學模組平台(Optical Modularized Platform)、田口方法(Taguchi Method)、穩健設計之效益(Robust Design Performance) 穩健設計方... | ||||
| 103 | 開發以協同... 開發以協同創造為基礎的大量個人化服務方法 (A Co-creation Based Methodology to Achieve Mass Personalization) | NTHU NDLTD | 碩 | 無口試日期 |
模組化(Service Engineering)、大量個人化(Co-creation)、顧客體驗(Mass Personalization)、結構方程模型(Customer Experience) 模組化(S... | ||||
| 103 | 基於模擬的... 基於模擬的供應鏈設計方法於過程中考慮積層製造及供應鏈面向 (A Simulation Based Supply Chain Planning Method Considering Design for Additive Manufacturing and Supply Chain) | NTHU NDLTD | 碩 | 無口試日期 |
面向供應鏈設計(Design for Additive Manufacturing)、面向積層製造設計(Design for Supply Chain)、供應鏈(Simulation)、決策支援系統(Decision Support System) 面向供應鏈... | ||||
| 103 | 以案例式分... 以案例式分析為基的方法 用以協助服務價值鏈及永續網絡的設計 (A Case-Based Method for Service-Oriented Value Chain and Sustainable Network Design) | NTHU NDLTD | 碩 | 無口試日期 |
價值鏈設計(Value Chain Design)、永續網絡設計(Sustainable Network Design)、案例式推理(Case-Based Reasoning) 價值鏈設計... | ||||
| 103 | 開發一以心... 開發一以心跳變異率與機器學習為基礎之個人化智慧型音樂選曲系統 (Developing a Personalized Intelligent Music Selection System Based on Heart Rate Variability and Machine Learning) | NTHU NDLTD | 碩 | 無口試日期 |
決策樹分析(Decision Tree)、穿戴式裝置(Wearable device)、機器學習(Machine learning)、心跳變異率(Heart rate variability) 決策樹分析... | ||||
| 103 | 應用模糊C... 應用模糊C平均分群演算法與HRV提升治療型音樂的使用者經驗 (An Investigation of Therapeutic Music Design Using Fuzzy C-Means Clustering and HRV to Enhance User Experience) | NTHU NDLTD | 碩 | 無口試日期 |
音樂治療(Music Therapy)、模糊 C 平均分群演算法(Fuzzy C-Means (FCM) Clustering Algorithm)、心跳變異性(Personal Cognition)、使用者經驗(Heart Rate Variability (HRV))、個人認知(User Experience (UX)) 音樂治療(... | ||||
| 102 | 運用價值工... 運用價值工程提升新產品競爭力之探討：以無線通訊SiP產品為例 (Apply Value Engineering to Enhance New Product Competitiveness:A Case Study of Wireless SiP Products) | NTHU NDLTD | 碩 | 無口試日期 |
系統級封裝(System in Package (SiP))、產品生命週期(Product Life Cycle (PLC))、價值工程(Value Engineer (VE))、深度訪談法(In-Depth Interview)、層級分析法(Analytic Hierarchy Process (AHP)) 系統級封裝... | ||||
| 102 | 服務供應商... 服務供應商之模型建立與績效表現之研究-以台灣便利商店公司為例 (Service Company Modeling and Performance Measurement with A Taiwan Convenience Store Case Study) | NTHU NDLTD | 碩 | 無口試日期 |
服務供應商、供應鏈模型、服務績效評估、粒子群演算法 服務供應商... | ||||
| 102 | 穩健技術服... 穩健技術服務平台規劃基於公司競爭優勢與未來市場趨勢：以晶圓代工廠為例 (A Robust Technical Service Platform Planning Based on Company Competitive Advantage and Future Market Trend: A Case Study of IC Foundry) | NTHU NDLTD | 碩 | 無口試日期 |
技術服務平台設計(Technical Service Platform Design)、技術預測(Technology Forecasting)、徑相基底函數(Radial Basis Function (RBF))、模糊權重法(Fuzzy Weights)、三維積體電路(3-Dimension Integrated Circuit (3D-IC)) 技術服務平... | ||||
| 102 | 發展產品服... 發展產品服務系統商業模式的系統方法 (A SYSTEMATIC METHODOLOGY TO DEVELOP A BUSINESS MODEL OF A PRODUCT SERVICE SYSTEM) | NTHU NDLTD | 碩 | 無口試日期 |
產品服務系統(PSS)、商業模型、多準則決策方法(MCDM)、TOPSIS、AHP 產品服務系... | ||||
| 102 | 整合心理和... 整合心理和生理數據量測技術之使用性衡量與改善方法: 以應用健康管理運動之產品為例 (Integrating Psychological and Physiological Techniques to Measure and Improve Usability: an Empirical Study on Health Management Sport Applied Product) | NTHU NDLTD | 碩 | 無口試日期 |
使用性、使用性衡量、心理量測技術、生理量測技術、問卷、心跳、眼動追蹤、體感運動、健康管理 使用性、使... | ||||
| 102 | 一個健康管... 一個健康管理的體感遊戲之實證研究利用羅吉斯回歸來衡量有效運動與服務補救設計 (An Empirical Study of Health Management Motion Sport Game Using Logistic Regression Model to Measure Effective Exercise and Service Recovery Design) | NTHU NDLTD | 碩 | 無口試日期 |
服務補救(Service Recovery)、羅吉斯迴歸(Logistic Regression)、運動自覺量表(Kinect) 服務補救(... | ||||
| 101 | 透過失效模... 透過失效模式與效應分析與服務品質量表設計產品服務系統—以成衣業為例 (Redesign of Product Service System Applying Failure Mode and Effects Analysis and SERVQUAL—A Case Study of Clothes Industry) | NTHU NDLTD | 碩 | 無口試日期 |
產品服務系統(PSS)、服務創新(Service Innovation)、失效模式與效應分析(FMEA) 產品服務系... | ||||
| 101 | 考量供應鏈... 考量供應鏈之不確定性下永續性產品設計之研究 (An Integral Methodology for Sustainable Product and Supply Chain Design Decisions under Uncertainties) | NTHU NDLTD | 碩 | 無口試日期 |
永續設計(Design for Sustainability)、永續性產品設計(Sustainable Product Design)、供應鏈設計(Design for Supply Chain)、模糊集合論(Fuzzy Set Theory)、供應商篩選(Supplier Selection) 永續設計(... | ||||
| 101 | 一個系統性... 一個系統性的服務家族設計與最佳化方法─以居家服務開發為例 (A Systematic Method for Service Family Design and Optimization with a Home Service Case Study) | NTHU NDLTD | 碩 | 無口試日期 |
服務創新(Service Innovation)、服務績效評估(Service Performance Evaluation)、資料包絡分析法(Data Envelopment Analysis)、服務家族設計(Service Family Design)、粒子群演算法(Particle Swarm Optimization) 服務創新(... | ||||
| 101 | 綠色模組設... 綠色模組設計-運用突變粒子群演算法 (GREENMODULARIZATION USING MUTATIVE PARTICLE SWARM OPTIMIZATION METHOD) | NTHU NDLTD | 碩 | 無口試日期 |
永續性設計、模組設計、溫室氣體、突變粒子群演算法 永續性設計... | ||||
| 101 | 結合模糊理... 結合模糊理論與失效模式評估新產品可行性之研究 (Combining the Fuzzy Theory and FMEA to Assess Feasibility Research of New Projects) | NTHU NDLTD | 碩 | 無口試日期 |
新產品開發、失效模式與效應分析、模糊理論 新產品開發... |