Labook

清大研究所畢業論文與畢業時長統計

陳玉彬(博: 5.63 years、碩: 2.16 years)

政府計畫(GRB),建議「依年度遞減排序」,以查看最新的研究方向。

畢業學年度論文標題連結學位畢業時長(years)
關鍵字
112
新一代戰機...
新一代戰機環境控制系統程式開發 (Environmental control system of the new generation combat aircraft development)
NTHU
NDLTD
2.16
戰機環控系統(air cycling system)、空氣循環系統(environmental control system)、燃油熱管理系統(fuel thermal management system)
戰機環控系...
111
應用漸進式...
應用漸進式生成對抗網路擴增前開式晶圓盒濾紙影像 (Augmentation of Front Opening Unified Pod Filter Images Using a Progressive Growing Generative Adversarial Network)
NTHU
NDLTD
2.00
前開式晶圓盒(front opening unified pod)、漸進式生成對抗網路(progressive growing generative adversarial network)、影像擴增(image augmentation)、深度學習(deep learning)
前開式晶圓...
111
雅努斯結構...
雅努斯結構整合輻射汲熱器與冷卻器以實現日間輻射冷卻 (Integration of thermal radiation extractor and dissioater with the Janus structure for daytime radiative cooling)
NTHU
NDLTD
1.99
大氣窗(atmospheric window)、日間輻射冷卻(daytime radiative cooling)、電泳沉積法(electrophoretic deposition)、雅努斯結構(Janus structure)、輻射冷卻器(radiative dissipater)、輻射汲熱器(radiative extractor)
大氣窗(a...
111
以相變材料...
以相變材料實現太陽能屋瓦之熱管理 (Realization of thermal management for solar roof tiles using a phase change material)
NTHU
NDLTD
1.99
建築整合太陽能(building-integrated photovoltaics (BIPV))、太陽能屋瓦(Copper Indium Gallium Selenide (CIGS))、銅銦鎵硒(phase change materials (PCM))、相變材料(solar roof tiles)、溫度控制(temperature control)、熱管理(thermal management)
建築整合太...
111
選擇性雷射...
選擇性雷射熔融製程熔池熱流動力及動態熱應力數值分析與實驗量測 (A Numerical and Experimental Investigation of Melt Pool Thermal-Fluid and Thermomechanical Dynamics during Selective Laser Melting)
NTHU
NDLTD
4.45
添加劑製造(Additive manufacturing)、的殘餘應力(Selective laser melting)、選擇性雷射熔化(Quasi-transient thermomechanical analysis)、數值模擬(Powder bed fusion)
添加劑製造...
111
雷射光熱還...
雷射光熱還原微尺度積層製程中的多相介面傳遞現象 (Multiphase Interfacial Transport Phenomena in Laser Induced Photothermal Reduction Process of Microscale Additive Manufacturing)
NTHU
NDLTD
4.45
激光光熱還原(Laser photothermal reduction)、還原性金屬離子溶液(Reductive metal ion solution)、液-氣-固界面動力學(liquid-vapor-solid interfacial dynamics)、馬蘭戈尼效應(Marangoni effect)、柔性電子(Flexible electronics)
激光光熱還...
110
銅銦鎵硒薄...
銅銦鎵硒薄膜太陽能屋瓦建模與溫度分布預測 (CIGS thin-film solar tiles modeling and temperature distribution prediction)
NTHU
NDLTD
3.99
太陽能屋瓦(solar roof tiles)、數值模型(CIGS solar tiles)、建材溫度(temperature distribution)、銅銦鎵硒太陽能板(numerical model)
太陽能屋瓦...
110
開發中溫相...
開發中溫相變材料儲熱節能裝置 (Development of a mid-temperature thermal energy storage system with phase change material)
NTHU
NDLTD
1.99
節能(energy saving)、儲能(energy storage)、中溫(mid-temperature)、相變材料(phase change material)、廢熱回收(waste heat recovery)、熱管理(thermal management)
節能(en...
110
工具機熱誤...
工具機熱誤差預測和攻牙調變技術程式開發 (Prediction of thermal error on machine tool and development of program for tapping modulation)
NTHU
NDLTD
1.98
熱誤差預測(thermal error prediction)、關鍵溫度點(key temperature point)、攻牙時間(tapping time)、最佳化(optimization)
熱誤差預測...
110
低溫域有機...
低溫域有機朗肯循環淨輸出功率控制模型建立 (Development the control model for net output power of organic Rankine cycle using the low-grade heat source)
NTHU
NDLTD
1.98
低溫域有機朗肯循環(low-grade heat source organic Rankine cycle)、PID控制(PID control)、管路壓損(pipeline pressure loss)
低溫域有機...
110
計算量子力...
計算量子力學對於PLED元件材料之光電特性分析與實驗驗證 (Computational Quantum Mechanics Analysis and Experimental Verification of Photoelectric Characteristics of PLED Materials)
NTHU
NDLTD
9.38
密度泛函理論(density function theory (DFT))、聚噻吩(polythiophene)、最高佔據分子軌道(highest occupied molecular orbital (HOMO))、最低未佔據分子軌道(lowest unoccupied molecular orbital (LUMO))、能隙(band gap)
密度泛函理...
110
彈性自組裝...
彈性自組裝三維光子晶體與光子能隙隨環境變化之研究 (Flexibly self-assembling three-dimensional photonic crystals and investigating their photonic bandgap dependence on environments)
NTHU
NDLTD
4.22
光子晶體(photonic crystal)、光子能隙(photonic bandgap)、自組裝法(self-assembly method)、蘭姆波(Lamb wave)、咖啡環效應(coffee-ring effect)、能隙偏移(bandgap shift)
光子晶體(...
109
運用深度學...
運用深度學習之前開式晶圓盒缺陷檢測程式開發 (Development of programs for FOUP defect inspection using deep learning)
NTHU
NDLTD
2.03
前開式晶圓盒(FOUP)、電腦視覺(computer vision)、深度學習(deep learning)、卷積神經網路(convolutional neural network)、缺陷檢測(defect inspection)
前開式晶圓...
109
應用於印刷...
應用於印刷電路板之非參考法缺陷檢測技術 (The application of non-referential based method on printed circuit board defect detection)
NTHU
NDLTD
2.03
印刷電路板(PCB)、電路缺陷檢測(defect detection)、非參考比對方法(non-referential method)、機器視覺(machine vision)
印刷電路板...
109
銅銦鎵硒薄...
銅銦鎵硒薄膜型太陽能模組及傳統屋瓦數值模型建立及溫度分布研究 (CIGS thin-film solar modules and traditional tiles numerical model and temperature distribution)
NTHU
NDLTD
2.01
銅銦鎵硒(copper indium gallium selenide)、太陽能屋瓦(solar roof tiles)、熱輻射(heat radiation)、熱傳(heat transfer)、光電效應(photoelectric effect)
銅銦鎵硒(...
109
低溫場域之...
低溫場域之低GWP冷媒發電系統效能最佳化 (Optimization the Performance of Low GWP Refrigerant Power Generation System Using the Low-Grade Heat Source)
NTHU
NDLTD
2.01
基因演算法(genetic algorithm)、地熱發電(geothermal power)、低GWP冷媒(low GWP refrigerant)、有機朗肯循環(organic Rankine cycle)、熱電系統優化(thermoelectric system optimization)
基因演算法...
109
探討陽極氧...
探討陽極氧化製程對鋁基板之輻射散熱影響 (Influences from anodization on the radiative cooling of aluminum substrates)
NTHU
NDLTD
2.17
輻射冷卻(radiative cooling)、大氣窗波段(atmospheric window)、陽極氧化鋁膜(AAO)、有限差分時域法(FDTD)
輻射冷卻(...
108
以放射率探...
以放射率探討鍺-銻-鍗材料三相之光學常數 (Investigation on optical constants of Ge-Sb-Te in three phases using emissivity)
NTHU
NDLTD
2.00
放射率(emissivity)、鍺-銻-鍗(Ge2Sb2Te5)、相變材料(phase change material)、薄膜(thin film)、紅外光(infrared light)、光學常數(optical constants)
放射率(e...
108
可控溫控時...
可控溫控時熱輻射烘爐之開發與均溫性最佳化 (Development of a Temperature-/Time-Control Radiation Oven with Temperature Uniformity Optimization)
NTHU
NDLTD
碩(外籍生)2.92
熱輻射烘爐(thermal radiation oven)、視因子(view factor)、數值模型(simulation model)、田口方法(Taguchi method)
熱輻射烘爐...
107
基因演算法...
基因演算法優化熱力循環以提升熱效率 (Optimization of thermodynamic cycles to enhance thermal efficiency using genetic algorithm)
NTHU
NDLTD
1.98
地熱發電(combined cycle power plant)、汽電共生循環(genetic algorithm)、有機朗肯循環(geothermal power generation)、卡琳娜循環(Kalina cycle)、基因演算法(organic Rankine cycle)、熱效率(thermal efficiency)
地熱發電(...
107
採紅外線加...
採紅外線加熱之凍乾機內機器視覺系統開發 (Development of machine vision system for an infrared heating lyophilizer)
NTHU
NDLTD
1.98
機器視覺(machine vision)、自動光學檢測(infrared heating)、紅外線加熱(freeze drying)、冷凍真空乾燥(undefined)
機器視覺(...
106
建立光學常...
建立光學常數計算模型與開發高溫樣本方向放射率自動化量測系統 (Construction of Numerical Model for Obtaining Optical Constants and Development of Automatic Measurement System for High Temperature Directional Emissivity)
NTHU
NDLTD
1.93
放射率(automatic)、高溫(emissivity)、自動化(high temperature)、光學常數(numerical model)、計算模型(optical constants)
放射率(a...
106
開發具有溫...
開發具有溫室效果之示溫儲熱容器 (Development of a Container Using Heat Storage Materials to Display Temperature and Realize Greenhouse Effect)
NTHU
NDLTD
1.93
溫室效應(greenhouse effect)、儲熱材料(optimum drinking temperature zone)、示溫(Taguchi method)、適飲(temperature indication)、熱模擬分析(thermal simulation and analysis)、田口方法(thermal storage materials)
溫室效應(...